Difference between revisions of "240p test suite"

From Classic Console Upscaler wiki
Jump to navigation Jump to search
(PLUGE)
(PLUGE)
Line 30: Line 30:
  
 
Reduce the Brightness until the bars on the sides of the PLUGE are no longer visible, and then slowly raise it until they are *just* visible. Since every hardware platform has different capabilities when displaying black levels, please check the in suite help for details. In general you can calibrate for NTSC 7.5 IRE setup, or for RGB full range as found in most game consoles. In PAL modes the NTSC 7.5 setups is not shown. In such case, either 2 or 4 IRE patterns are available if the platform supports them. Most versions of the suite have a highlight feature that shows the bars and their values for a short lapse.
 
Reduce the Brightness until the bars on the sides of the PLUGE are no longer visible, and then slowly raise it until they are *just* visible. Since every hardware platform has different capabilities when displaying black levels, please check the in suite help for details. In general you can calibrate for NTSC 7.5 IRE setup, or for RGB full range as found in most game consoles. In PAL modes the NTSC 7.5 setups is not shown. In such case, either 2 or 4 IRE patterns are available if the platform supports them. Most versions of the suite have a highlight feature that shows the bars and their values for a short lapse.
 +
 +
[[File:Pluge_assist_rgb.png|Assist Mode]]
  
 
For white level adjustment in CRT based displays, raise the contrast until the scanlines in the white are no longer visible, and lower them until they are the same relative size to the rest of the scanlines in the gray bars.
 
For white level adjustment in CRT based displays, raise the contrast until the scanlines in the white are no longer visible, and lower them until they are the same relative size to the rest of the scanlines in the gray bars.
  
 
This adjustment ensures that anything intended to be black is actually black, and allows all detail to be seen on dark scenes.
 
This adjustment ensures that anything intended to be black is actually black, and allows all detail to be seen on dark scenes.
 
[[File:Pluge_assist_rgb.png|Assist Mode]] [[File:Pluge_assist_ntsc.png|Assist mode]]
 
  
 
==== Color Bars ====
 
==== Color Bars ====

Revision as of 03:29, 28 June 2014

Genesis version

A homebrew software suite for video game consoles developed to help in the evaluation of upscalers, upscan converters, line doublers and of course TV processing of 240p video. The Wii, Dreamcast and GameCube versions have modes for 480i, 288p, 576i and 480p evaluation as well.

It consists of tests designed with the processing of 240p signals in mind, although when possible it includes other video modes and specific tests for them. These have been tested with video processors on real hardware and a variety of displays, including CRTs, PVMs, BVMs and Arcade monitors via RGB.

As a secondary target, the suite aims to provide tools for calibrating colors, geometry, linearity, overscan and black & white levels, for specific console outputs and setups.

Current platforms are: Sega Genesis (Mega Drive), Sega CD (Mega CD), Sega Dreamcast, Nintendo Wii and Nintendo GameCube.

Test Patterns and Interactive Tests

Since the software is running on a gaming platform, there is some degree of interactivity not possible on regular video tests, we have tried to use this as best as possible when applicable. For the rest of the cases regular test patterns, with inspiration in other sources, have been used.

Here's a description of each one of the options, as well as any specific commands within them.

Test Patterns

Genesis version

These are found under the main menu's 'Test Patterns' sub menu:

PLUGE

Dreamcast version Genesis Version

The picture line-up generation equipment (PLUGE) is a test pattern used to adjust the black level and contrast of a video signal.

The pattern in this suite is mainly designed to adjust the black level. The control for setting this on your TV is usualy named "Brightness". White level on CRT monitors can also be easily calibrated with it.

Reduce the Brightness until the bars on the sides of the PLUGE are no longer visible, and then slowly raise it until they are *just* visible. Since every hardware platform has different capabilities when displaying black levels, please check the in suite help for details. In general you can calibrate for NTSC 7.5 IRE setup, or for RGB full range as found in most game consoles. In PAL modes the NTSC 7.5 setups is not shown. In such case, either 2 or 4 IRE patterns are available if the platform supports them. Most versions of the suite have a highlight feature that shows the bars and their values for a short lapse.

Assist Mode

For white level adjustment in CRT based displays, raise the contrast until the scanlines in the white are no longer visible, and lower them until they are the same relative size to the rest of the scanlines in the gray bars.

This adjustment ensures that anything intended to be black is actually black, and allows all detail to be seen on dark scenes.

Color Bars

Dreamcast version Genesis Version

This is a typical pattern for adjusting black, white, and color levels in general. Based on the CPS-2 color adjust pattern. Each bar has been set at a regular interval in hexadecimal, corresponding to colors 0x00 to 0xFF (0 to 255). Displaying all the "pure" colors possible on each system, from lowest to highest intensity.

This is adjusted in the same way black levels are set with the PLUGE. If you adjusted the black level correctly with the PLUGE, the rectangles under the "1" column should be barely visible.

Adjust the white level first, this is done using the "Contrast" control on your TV set. Raise it until you cannot distinguish between the two blocks under the "F", and lower it slowly until you can clearly tell them apart.

The same procedure should be used with each color, raise the control that adjusts the individual color level (not the color/tint one) until you can't tell the two boxes under the "F" from each other, and then lower it until you can distinguish them clearly.

Repeat for each color and you are set.

Genesis/Mega Drive/Sega CD Version

In the case of the Genesis, there is a limitation when trying to display primary colors. While it can display 61 colors simultaneously (4 palettes of 15 colors + alpha each), the palette only has 8 pure tones of Red, Green and Blue. Because of this, the scale can only display 8 tones per color, including the white scale. Nevertheless, using the Shadow/Highlights mode on the VDP it displays 12 shades of each color in this pattern, down to 6% on each pure tone.

SMPTE Color Bars & EBU Color bars

Dreamcast version

This pattern can be used to calibrate for NTSC levels regarding contrast and brightness, and appropriate colors as well. When in PAL mode, EBU color bars are shown instead since setup starts at 0mV.

You can toggle between 75% and 100% SMPTE levels.

Remember that the black level in the SMPTE pattern refers to 7.5 IRE for video, console games usually start at 0 IRE. This pattern can be used to calibrate colors - or auto calibrated in a professional display - and then black levels can be adjusted with the PLUGE pattern using the Full RGB Mode.

You can use blue filters of the blue only mode of your display if it is available.

In an SMPTE color bar image, the top two-thirds of the television picture contain seven vertical bars of 75% intensity. In order from left to right, the colors are gray, yellow, cyan, green, magenta, red, and blue. This sequence runs through all seven possible combinations that use at least one of the three basic color components of green, red, and blue, with blue cycling on and off between every bar, red cycling on and off every two bars, and green on for the leftmost four bars and off for the rightmost three.

Below the main set of seven bars is a strip of blue, magenta, cyan, and white castellations. When a television receiver is set to filter out all colors except for blue, these castellations, combined with the main set of color bars, are used to properly adjust the color controls; they appear as four solid blue bars, with no visible distinction between the bars and the castellations, if the color controls are properly adjusted.

Color Bars with Gray Scale

Dreamcast Version

This pattern idea and layout borrows form the Digital Video Essentials color adjust pattern. It has a gray background as reference, and can be used with color filters in order to adjust color accuracy.

Color Bleed Check

Genesis version Checker board

This pattern helps diagnose unneeded color up-sampling. It consists of one pixel width color bars alternating with one pixel width black bars.

You can change the vertical bars to a checker board with the A button. The idea for this pattern was provided by Konsolkongen, for use with the DVDO EDGE.

Grid

Dreamcast Version

A grid which borrows its basic pattern from the CPS-2 grid. It is used to determine linearity on CRTs, but is presented here in order to align the screen and find out overscan on the display. It uses the full resolution of the target console, with a margin of red squares for the corners.

Consumer CRTs usually don't allow compensating for overscan, and many games don't draw outside the white square borders. You can measure how many pixels your display is cropping with the overscan test.

Linearity

Genesis Version

Five circles are displayed, one in each corner and a big one in the middle. Used on CRTs to check linearity of the display or scaler, in this case you can show or hide the grid. The pattern is designed to work in either NTSC or PAL, respecting the 10:11 pixel and 59:54 pixel aspect ratios. Circles should be perfectly round in the display.

The linearity of the display or upscaler can be verified by measuring the diameter of the circles. Of course the linearity should be kept in all directions.

It is interesting to see how the intensity of the light changes when turning off the grid on some flat panel displays.

Gray Ramp

Genesis version

A gray ramp adjusted to each console color capabilities is displayed. Useful for calibrating white levels and adjusting color temperature.

You should make sure the bars are gray, with no red or blue bias. This can be adjusted with the individual color settings, or the tint control in NTSC displays.

White Screen

As the name implies, the screen is filled with solid white. The user can change the fill color cycling between white, black, red, green and blue. This pattern can be changed to a custom color by pressing the A button while in the white screen, and selecting the desired RGB values.

Pressing A while displaying the black screen and in NTSC modes will toggle between 7.5 IRE and the 0 IRE below black levels in all versions but the Genesis one.

A full white screen usually makes evident audio interference in some RGB cables.

The fully black screen might cause some displays or upscan converters to stop recognizing the signal, which is a common (and undesirable) condition during gameplay.

100 IRE

100IRE.png

Displays a 100 IRE pattern, which can be changed in 10 IRE intervals between 0 and 100, or from 100 to 140. The Genesis version has 7 IRE values, which correspond to its palette.

Sharpness

You should set the sharpness of your display to a value that shows clean black and gray transitions, with no white ghosting in between.

On most modern displays, the sharpness control is an edge-enhancement control, and most probably should be set to zero, or in the middle.

In some PVM/BVM displays this is also referred to as aperture.

Overscan

With this pattern you can interactively find out the overscan in pixels and percentage of each edge in a display.

Increment the overscan until you see the white border, then go back one pixel. The resulting number is the amount of overscan in pixels in each direction.

Interactive Tests

Drop Shadow Test

Genesis version

This is a crucial test for 240p upscan converters. It displays a simple sprite shadow (32 by 32 pixels) against a background, but the shadow is shown only on each other frame. On a CRT this achieves a transparency effect, since you are watching a 30hz shadow on a 60hz signal. No background detail should be lost and the shadow should be visible.

This is a very revealing test since it exposes how the device is processing the signal. On devices that can't handle 240p signals, you can usually see that the signal is being interlaced with an odd and an even frame, as if it were regular 480i. This shows a shadow that doesn't flicker, with feathering (a line is drawn and the next one isn't).

The user can toggle the frame used to draw the shadow with the A button on the Genesis or the X button on the Dreamcast. Backgrounds can be switched with the A button and the B button toggles sprites.

Striped Sprite Test

Genesis Version

There are actually deinterlacers out there which can display the drop shadows correctly and still interpreted 240p as 480i. With a striped sprite it should be easy to tell if a processor tries to deinterlace (plus interpolate) or not.

The user can change background with the A and B buttons.

Lag Test

Dreamcast version

This test is designed to be used with two displays connected at the same time. One being a CRT, or a display with a known lag as reference, and the other the display to test.

Using a camera, a picture should be taken of both screens at the same time. The picture will show the frame discrepancy between them.

The circles in the bottom help determine the frame even when the numbers are blurry.

The Sega Genesis version of the test can be used with a Nomad as the reference display.

Manual Lag Test

Genesis version

The main intention is to show a changing pattern on the screen, and given a visual and repetitive cue, play a beep alternating speakers. This should show to some degree the lag (if present) when processing the signal.

As an added feature, the user can click the A button when the sprite is aligned with the one on the background, and the offset in frames form the actual intersection will be shown on screen. This can be repeated ten times and the software will calculate the average. Whenever the button was pressed before the actual intersection frame, the result will be ignored (but still shown onscreen).

The B button can be used to change the direction of the sprite from vertical to horizontal, or display both at the same time.

The C button on the Genesis and the X button on the Dreamcast can be used to turn off the audio cue. In the case of the Dreamcast, if a Purupuru (Jump pack) is found, it will be used as well.

Of course the evaluation is dependent on reflexes and/or rhythm more than anything. The visual and audio cues are the more revealing aspects which the user should consider, of course the interactive factor can give an experienced player the hang of the system when testing it via different connections. Since a frame is around 16 ms (1000/60), that value must be considered the general error when using the test results.

SIP Michrophone and Fast Fourier Transform Lag Test (Dreamcast only)

Dreamcast version

SIP Microphone

This test can be used to very accurately measure display lag, if both video and audio follow the same chain.

It uses Fast Fourier Transform (FFT) to detect the audio delay by playing a 1Khz tone and precisely calculating the frame delay.

You need a Dreamcast microphone in order to access this test, fortunately they are neither rare nor expensive.

The L and R triggers allow you to change the frame accuracy of the FFT used to estimate the audio delay. This ranges from 1 frame to 1/4th of a frame (16.67ms to 4.16ms, or 20ms to 5ms in PAL).

The smaller the frame accuracy, the higher the probability of small errors; since the Dreamcast's microphone samples rate is 11Khz.

However all settings are within the hardware capabilities.

This test uses the "Fastest Fourier Transform in the West" library for its calculations.

Scroll Test

Genesis version

This test shows a two layer background from Sonic the Hedgehog. The speed can be varied with the d-pad, and change direction with the B button. The A button stops the scroll.

Grid Scroll Test

Genesis version

A grid is scrolled vertically or horizontally, which can be used to test linearity of the signal and how well the display copes with scrolling. The C or X buttons can be used to toggle between horizontal and vertical, while the d-pad regulates speed, the A button stops and the B button changes direction.

Horizontal Stripes

Dreamcast Version

A pattern consisting of a full screen of horizontal black and white stripes, one pixel tall each. This is a taxing pattern, specially when pressing the A button which enables alternating each frame the color of the lines. A good 240p video processor should show all frames. On several displays we've observed that the screen stays static on the first pattern displayed on screen and no change is shown. For this a Frame counter is present, which can be enabled with the C button on Genesis or the X button on Dreamcast.

The user can also change the frames with the B button, which alternates the even and odd frame cadence for the automatic switching of patterns.

When using the 480i resolution on the Dreamcast version, this pattern makes evident the way the upscaler is processing the signal as well.

Checkerboard

Dreamcast Version

An even more taxing pattern, a one pixel black and one pixel white alternating pattern. Exactly the same commands apply as with the Horizontal Stripes.

This pattern also makes obvious if all lines are being scaled equally, if some appear thicker than other the scaler or display is not displaying them equally.

Backlit Zone Test

This test is designed to evaluate how a display deals with dark scenes. A single sprite of variable size can be controlled by the user on top of a completely black background. The dimming zones can be easily spotted while doing this and the rest of the screen should - in theory - remain off. The sprite can be hidden with "Y" (Dreamcast) or "C" (Genesis), and the sprite size can be changed with "A" and "B".

Sound Test

Genesis Version

This test allows to play a tone on the left or right audio channels, it also can change the panning of the tone for a central channel (both at the same time). It is meant to test if the stereo cables are connected correctly.

The Genesis version uses a TFM track by Shiru, using the YM synth.

Versions

There are currently five platforms that run the suite, all have been developed and tested on real hardware, The software should run in NTSC mode by default when possible, or if your console is modified. All versions support PAL resolutions and modes when the hardware allows it.

Sega Genesis/Mega Drive

The Sega Genesis version was developed using the SGDK, it was the first version of the 240p Test Suite and is fully coded in C. In order to run it you need a flash cart, we have tested the following:

The Genesis resolution is 320x224 and is being used fully, when the VDP is in PAL mode the suite can output 320x240 as well.

It uses a default 3 button layout for compatibility with the basic hardware configuration, but if a 6 button controller is detected the Z button displays contextual help anywhere in the suite. To access this help with a 3 button controller, just enable it form the main menu and it will pop up before each pattern and test.

Download from Sourceforge

Sega/Mega CD

This is identical to the Genesis version, but loaded from the Sega/Mega CD. In order to run it, you only need a blank CD-R and the appropriate version for the region of your hardware. It is recommended you burn it at 1-4x speed.

In technical terms it uses a slightly different memory map, a Sega CD loader created by Luke Usher and custom boot code to run the SGDK binary.

Download from Sourceforge

Sega Dreamcast

The Sega Dreamcast version includes more options, but the core functionality for 240p is the same. No special hardware or modifications are needed, it will run on any MIL-CD compatible Dreamcast after burning the CDI image (discjuggler format). It uses the KallistiOS as framework and SDK.

This version has a menu option for changing the current resolution, with the following values:

  • 240p: Standard 320x240 at 60hz is used, with all graphic data in that resolution.
  • 480i scaled 240p assets (NTSC): This is 640x480i at 60hz, but using all the resources at 320x240 using internal line doubling. Useful for testing for this case which is present in many Dreamcast and PS2 games. Also known as "Fake hi-res"
  • 480i mixed 480p/240p assets (1:1/NTSC): It is 640x480i at 60hz as well, however some graphics are unscaled and shown only on the upper left corner of the screen (the first 320x240 pixels). Since there is a 1 to 1 pixel ratio as in 240p, tests can be performed for 480i de-interlacers and scalers. Some test are shown in full 480i, such as the grid and scroll.
  • 480p mixed 480p/240p assets (1:1)with scanlines: Only available when using a VGA Box.Scanline intensity can be modified from options.
  • 480p scaled 240p assets & scanlines: Only available when using a VGA Box. This is internally line-doubled and displayed. In the case of previous resolutions, they are also internally line doubled to 480p, but respecting each mode variations.
  • 288p: The progressive variant of PAL 625i line video, it has 312 lines of which 288 video lines are active. The DC can output 320x264p when in this mode.
  • 576i scaled 240p assets (PAL): This displays the 240p patterns in 576i mode. It uses the 480 visible lines, 240 in each field. The whole content of the suite is linedoubled in this mode.
  • 576i 480/240p assets (1:1/PAL): It is 576i at 50hz as well, however some graphics are unscaled and shown only on the upper left corner of the screen (the first 320x240 pixels). Since there is a 1 to 1 pixel ratio as in 240p, tests can be performed for 480i de-interlacers and scalers. Some test are shown in 480 resolution, such as the grid and scroll.

PAL modes must be enabled from the Options menu and are only available in 'European Flash ROM' Dreamcasts since other regions output a corrupt PAL signal.

The DC cannot use the whole 288 lines as active video, instead it can draw 264 lines in 288p mode and only 480 lines when in 576i mode. In order to help overcome this limitation, the 240p suite adds several options for evaluation of PAL modes.


PAL consoles output PAL 60 when NTSC modes are selected and a compoiste cable is used, and start at line 23 instead of line 22.

The software is compatible with composite, s-video, RGB-21/SCART and VGA cables.

The Dreamcast resolution is full 320x240 when in that mode and using the PowerVR (PVR) version (however the lowest pixel is not visible in most modes), there is a previous SDL version that runs on 320x234 mode, but the small framework was rewritten to use the PVR chip on the Dreamcast directly with a great advantage in speed for frame alternating patterns. However the SDL version is kept - but no longer maintained - for documentation purposes along with its source code.

Download from Sourceforge

Nintendo Wii

The Wii version - just as the Dreamcast one - includes more options, but the core functionality for 240p is the same. No special hardware is needed, but your Wii system must be able to run homebrew. It uses the devKitPPC as framework and SDK, via pure GX calls.

It supports the Wiimote, nunchuck, Wii classic and Gamecube controllers,

In order to install it, copy the 240pSuite folder to the app folder in your SD card, and launch it from the Homebrew channel. You can also use Wiiload via wifi.

This version has a menu option for changing the current resolution, with the following values:

  • 240p: Standard 320x240 at 60hz is used, with all graphic data in that resolution.
  • 480i scaled 240p assets (NTSC): This is 640x480i at 60hz, but using all the resources at 320x240 using internal line doubling. Useful for testing for this case which is present in many Dreamcast and PS2 games. Also known as "Fake hi-res"
  • 480i mixed 480p/240p assets (1:1/NTSC): It is 640x480i at 60hz as well, however some graphics are unscaled and shown only on the upper left corner of the screen (the first 320x240 pixels). Since there is a 1 to 1 pixel ratio as in 240p, tests can be performed for 480i de-interlacers and scalers. Some test are shown in full 480i, such as the grid and scroll.
  • 480p mixed 480p/240p assets (1:1)with scanlines: Only available when using a component cable. It must be enabled via the options menu as a precaution for not displaying 480p in a non compatible CRT.
  • 480p scaled 240p assets & scanlines: Only available when using a component cable. This is internally line-doubled and displayed. It must be enabled via the options menu as a precaution for not displaying 480p in a non compatible CRT.
  • 288p: The progressive variant of PAL 625i line video, it has 312 lines of which 288 video lines are active. The Wii can output 320x264p when in this mode.
  • 576i scaled 240p assets (PAL): This displays the 240p patterns in 576i mode. It uses the 480 visible lines, 240 in each field. The whole content of the suite is linedoubled in this mode.
  • 576i 480/240p assets (1:1/PAL): It is 576i at 50hz as well, however some graphics are unscaled and shown only on the upper left corner of the screen (the first 320x240 pixels). Since there is a 1 to 1 pixel ratio as in 240p, tests can be performed for 480i de-interlacers and scalers. Some test are shown in 528 resolution, such as the grid and scroll.

In order to help overcome resolution limitations when in PAL modes, the 240p suite adds several options for evaluation of PAL modes. Please check the interactive help for details.


The software is compatible with composite, s-video, SCART and component cables.

Includes libcheckregion

Download from Sourceforge

Nintendo GameCube

This is identical to the Wii version in terms of features.

Download from Sourceforge

Other versions

There is interest in creating versions for other platforms, so far these have been the choices due to having homebrew SDKs. Of course since it is an open source project, contributions are welcome and encouraged.

SNES and Sega Saturn version are being considered.

Source code

The source code is released under the GPL. Homebrew and open source SDKs have been used on the platforms so far. The test pattern images used to generate the graphical data for the console versions are included along with the source code.

The Sega CD loader (c) by Luke Usher/SoullessSentinel and is not under the GPL, used with permission for this project.

Source Code at sourceforge.

Downloads

Binaries are available for the Genesis/MegaDrive, Sega/Mega CD, GameCube, Wii and Sega Dreamcast versions.

In the case of the CD systems all you need is a CD-R and the console, for the cart version you need a flash cart,

Current release is 1.14 on the Genesis/Sega CD, 1.20 on Dreamcast and 1.7 on Wii/GC (version numbers are platform specific and have the same relative features) available at the 240p Test Suite code page.

WARNING: Programmer graphics inside

Bug Reports, new features and suggestions

All are welcome at the project page, the discussion page of this wiki or at the Shmups forum.

If you rather use mail, use aurbina -> junkerhq.net

New designs and graphics are welcome as well.

Contributors

  • Code: Artemio Urbina
  • Main menu graphics: Asher
  • SGDK assistance: Stephane
  • Sega CD Loader by: Luke Usher/SoullessSentinel (used with permission)
  • Sega CD assistance: Chilly Willy & TascoDLX
  • KallistiOS SDK assistance: BlueCrab
  • Advisor: Fudoh
  • Color Bleed: Konsolkongen

Information on 240p video and scanlines

Recommended Scalers, Upscan converters and Video Processors