Difference between revisions of "Neo Geo MVS"

From Classic Console Upscaler wiki
Jump to navigation Jump to search
(Created page with 'The MVS is the arcade verison of the Neo Geo AES. Both systems are practically identical in technical terms, however the cartridges use different ports and pinouts. == Model...')
 
Line 1: Line 1:
 +
[[File:Neo-Geo-MVS.jpg|300px|thumb|right|Neo Geo MV 1FS]]
 
The MVS is the arcade verison of the [[Neo Geo AES]]. Both systems are practically identical in technical terms, however the cartridges use different ports and pinouts.
 
The MVS is the arcade verison of the [[Neo Geo AES]]. Both systems are practically identical in technical terms, however the cartridges use different ports and pinouts.
  
 
== Models ==
 
== Models ==
  
 +
There are several models of teh Neo Geo arcade PCB, their main difference is teh capability to use several cartridges at the same time to enable switching between them.
 +
 +
An important difference is also [[JAMMA]] compatibility. Although Neo-Geo systems are JAMMA based, the MV-2F, MV-4F and MV-6F use different pinouts. It is recommended you check the model of your board and check if you need a JAMMA adapter to plug into your setup. Please check differences at [http://hardmvs.com/html/PCBcompare.htm HardMVS].
  
 
== XRGB-2 Specific settings ==
 
== XRGB-2 Specific settings ==
Line 13: Line 17:
  
 
Screen distortion is present in the upper lines.AFC needs to be set to Manual and AFC level to a value of 5. As usual with arcade PCBs, the 220 ohm setting must be used or the proper adjustment on the color lines via the potentiometers on your [[SuperGUN] must be tuned.
 
Screen distortion is present in the upper lines.AFC needs to be set to Manual and AFC level to a value of 5. As usual with arcade PCBs, the 220 ohm setting must be used or the proper adjustment on the color lines via the potentiometers on your [[SuperGUN] must be tuned.
 +
 +
== External Links ==
 +
[http://hardmvs.com/ Hard MVS] Excellent Neo geo Hardware resource
 +
 +
[http://neo-geo.com Neo-Geo.com] The best Neo Geo community around
  
 
[[Category:Arcade PCBs]]
 
[[Category:Arcade PCBs]]

Revision as of 20:31, 17 January 2010

Neo Geo MV 1FS

The MVS is the arcade verison of the Neo Geo AES. Both systems are practically identical in technical terms, however the cartridges use different ports and pinouts.

Models

There are several models of teh Neo Geo arcade PCB, their main difference is teh capability to use several cartridges at the same time to enable switching between them.

An important difference is also JAMMA compatibility. Although Neo-Geo systems are JAMMA based, the MV-2F, MV-4F and MV-6F use different pinouts. It is recommended you check the model of your board and check if you need a JAMMA adapter to plug into your setup. Please check differences at HardMVS.

XRGB-2 Specific settings

Image has no problems on the XRGB-2. As usual with arcade boards, the 220 ohm switch must be used for proper colors.

H_POS needs to be set to 1 in order to frame the whole screen.

XRGB-3 Specific settings

Screen distortion is present in the upper lines.AFC needs to be set to Manual and AFC level to a value of 5. As usual with arcade PCBs, the 220 ohm setting must be used or the proper adjustment on the color lines via the potentiometers on your [[SuperGUN] must be tuned.

External Links

Hard MVS Excellent Neo geo Hardware resource

Neo-Geo.com The best Neo Geo community around