Neo Geo MVS

From Classic Console Upscaler wiki
Revision as of 18:27, 18 January 2010 by Artemio (talk | contribs) (XRGB-3 Specific settings)
Jump to navigation Jump to search
Neo Geo MV 1FS

The MVS is the arcade verison of the Neo Geo AES. Both systems are practically identical in technical terms, however the cartridges use different ports and pinouts.

Models

There are several models of teh Neo Geo arcade PCB, their main difference is teh capability to use several cartridges at the same time to enable switching between them.

An important difference is also JAMMA compatibility. Although Neo-Geo systems are JAMMA based, the MV-2F, MV-4F and MV-6F use different pinouts. It is recommended you check the model of your board and check if you need a JAMMA adapter to plug into your setup. Please check differences at HardMVS.

XRGB-2 Specific settings

Image has no problems on the XRGB-2. As usual with arcade boards, the 220 ohm switch must be used for proper colors.

H_POS needs to be set to 1 in order to frame the whole screen.

XRGB-3 Specific settings

Screen distortion is present in the upper lines.AFC needs to be set to Manual and AFC level to a value of 3-5 (depending on MVS model it seems). As usual with arcade PCBs, the 220 ohm setting must be used or the proper adjustment on the color lines via the potentiometers on your SuperGUN must be tuned.

Models tested

  • MV-1FZ
  • MV-1C

External Links

Hard MVS Excellent Neo geo Hardware resource

Neo-Geo.com The best Neo Geo community around