Difference between revisions of "RetroTINK2X"

From Classic Console Upscaler wiki
Jump to navigation Jump to search
m
(added section on power)
Line 3: Line 3:
 
== Introduction ==
 
== Introduction ==
  
RetroTINK 2X is an affordable composite, S-Video, component video and analogue audio to HDMI transcoder/converter.
+
RetroTINK 2X is an affordable composite, S-Video, component video and analogue audio to HDMI transcoder/converter designed by Mike Chi.
  
 
Rather than being an all-purpose line doubler like the [[OSSC]], RetroTINK 2X aims to be a highly affordable device that can function either as a basic transcoder, line doubler on its own, or as a device integrated into a more complex setup.
 
Rather than being an all-purpose line doubler like the [[OSSC]], RetroTINK 2X aims to be a highly affordable device that can function either as a basic transcoder, line doubler on its own, or as a device integrated into a more complex setup.
Line 18: Line 18:
 
* Optional smoothing filter
 
* Optional smoothing filter
 
* Plexi-glass enclosure
 
* Plexi-glass enclosure
 +
 +
=== Availability ===
 +
 +
Pre-assembled units and accessories will soon be available from [https://www.videogameperfection.com/ VideoGamePerfection.com (EU)] and [https://castlemaniagames.com/ CastleMania Games (US)].
 +
 +
=== More information & discussion ===
 +
 +
* [https://www.videogameperfection.com/forums/forum/retrotink-2x/ Dedicated discussion forums]
 +
* [http://www.retrotink.com/ Mike Chi's homepage]
 +
 +
== Power ==
 +
 +
RetroTINK 2X requires an external DC power supply. Since the unit uses a Mini USB connector as a DC power supply input, any powered USB port can be used to supply voltage. If your television has a USB port then this can usually be used to power the device. If you require a separate power supply unit for the device then a suitable power supply can be purchased from [https://www.videogameperfection.com/products/replacement-psu-for-ossc/ VideoGamePerfection.com] or from any good electronics retailer.
 +
 +
Do not use a power supply rated for AC output, or a power supply rated higher than 5 volts DC, doing so can damage the RetroTINK 2X.
  
 
== Inputs ==
 
== Inputs ==
Line 35: Line 50:
 
The connector is a miniHDMI that outputs 480p/576p (line-doubled mode)
 
The connector is a miniHDMI that outputs 480p/576p (line-doubled mode)
 
or input resolution (pass-thru mode)
 
or input resolution (pass-thru mode)
 
== External links ==
 
 
[http://www.retrotink.com/ www.retrotink.com]
 

Revision as of 16:38, 28 September 2018

RetroTINK-logo.png

RetroTINK Unit

Introduction

RetroTINK 2X is an affordable composite, S-Video, component video and analogue audio to HDMI transcoder/converter designed by Mike Chi.

Rather than being an all-purpose line doubler like the OSSC, RetroTINK 2X aims to be a highly affordable device that can function either as a basic transcoder, line doubler on its own, or as a device integrated into a more complex setup.

Specifications

  • Video inputs: component, S-video and composite
  • Video formats: 240p/480i, 288i/576i, NTSC and PAL color
  • Video sync recovery and regeneration for non-standard sources (e.g., SNES)
  • Output: miniHDMI at 480p/576p (line-doubled mode) or input resolution (pass-thru mode)
  • Audio: 24-bit stereo
  • Power: microUSB
  • Ultra-low latency: less than 5 scanlines (83 microseconds)
  • Optional smoothing filter
  • Plexi-glass enclosure

Availability

Pre-assembled units and accessories will soon be available from VideoGamePerfection.com (EU) and CastleMania Games (US).

More information & discussion

Power

RetroTINK 2X requires an external DC power supply. Since the unit uses a Mini USB connector as a DC power supply input, any powered USB port can be used to supply voltage. If your television has a USB port then this can usually be used to power the device. If you require a separate power supply unit for the device then a suitable power supply can be purchased from VideoGamePerfection.com or from any good electronics retailer.

Do not use a power supply rated for AC output, or a power supply rated higher than 5 volts DC, doing so can damage the RetroTINK 2X.

Inputs


The signal can be 240/288p or 480/576i (NTSC/PAL). (480p input is not compatible on the Component input)

Outputs


The connector is a miniHDMI that outputs 480p/576p (line-doubled mode) or input resolution (pass-thru mode)