RetroTINK2X

From Classic Console Upscaler wiki
Revision as of 16:38, 28 September 2018 by BuckoA51 (talk | contribs) (added section on power)
Jump to navigation Jump to search

RetroTINK-logo.png

RetroTINK Unit

Introduction

RetroTINK 2X is an affordable composite, S-Video, component video and analogue audio to HDMI transcoder/converter designed by Mike Chi.

Rather than being an all-purpose line doubler like the OSSC, RetroTINK 2X aims to be a highly affordable device that can function either as a basic transcoder, line doubler on its own, or as a device integrated into a more complex setup.

Specifications

  • Video inputs: component, S-video and composite
  • Video formats: 240p/480i, 288i/576i, NTSC and PAL color
  • Video sync recovery and regeneration for non-standard sources (e.g., SNES)
  • Output: miniHDMI at 480p/576p (line-doubled mode) or input resolution (pass-thru mode)
  • Audio: 24-bit stereo
  • Power: microUSB
  • Ultra-low latency: less than 5 scanlines (83 microseconds)
  • Optional smoothing filter
  • Plexi-glass enclosure

Availability

Pre-assembled units and accessories will soon be available from VideoGamePerfection.com (EU) and CastleMania Games (US).

More information & discussion

Power

RetroTINK 2X requires an external DC power supply. Since the unit uses a Mini USB connector as a DC power supply input, any powered USB port can be used to supply voltage. If your television has a USB port then this can usually be used to power the device. If you require a separate power supply unit for the device then a suitable power supply can be purchased from VideoGamePerfection.com or from any good electronics retailer.

Do not use a power supply rated for AC output, or a power supply rated higher than 5 volts DC, doing so can damage the RetroTINK 2X.

Inputs


The signal can be 240/288p or 480/576i (NTSC/PAL). (480p input is not compatible on the Component input)

Outputs


The connector is a miniHDMI that outputs 480p/576p (line-doubled mode) or input resolution (pass-thru mode)