Difference between revisions of "Super NES"

From Classic Console Upscaler wiki
Jump to navigation Jump to search
(OSSC Specific settings: - added Reverse LPF info)
Line 24: Line 24:
  
 
== [[OSSC]] Specific settings ==
 
== [[OSSC]] Specific settings ==
 +
 +
The following settings must be used for a stable picture with the SNES on '''any''' display.
  
 
H-PLL pre-coast: 1<br />
 
H-PLL pre-coast: 1<br />
Line 34: Line 36:
 
A hardware mod for normalizing SNES 240p is under development. Technical details and status updates can be found in [https://shmups.system11.org/viewtopic.php?uid=11668&f=6&t=61285&start=0 this] thread.
 
A hardware mod for normalizing SNES 240p is under development. Technical details and status updates can be found in [https://shmups.system11.org/viewtopic.php?uid=11668&f=6&t=61285&start=0 this] thread.
  
A number of SNES games are compatible with the 256×240 optimal line triple mode, though this does not apply to every title. If you try this setting and the image appears to be missing pixels, your game is probably running in the SNES' horizontal hi-res (512×240) screen mode and is therefore not compatible.
+
A number of SNES games are compatible with the 256×240 optimal modes, though this does not apply to every title. If you try this setting and the image appears to be missing pixels, your game is probably running in the SNES' horizontal hi-res (512×240) screen mode and is therefore not compatible.
 +
 
 +
=== Reverse LPF ===
 +
 
 +
For multi-chip SNES consoles, the OSSCs Reverse LPF feature (under the Post Proc menu) is particularly effective. Since different SNES consoles have different amounts of blurring, a little trial and error may be required to find the perfect setting for your machine. The image below shows a before and after comparison of the reverse LPF feature.
 +
 
 +
[[File:SNES-LPF.jpeg]]
  
 +
Reverse LPF is particularly effective when using the 256×240 optimal modes, but works in generic mode too.
  
 +
Reverse LPF is not required for 1-chip SNES consoles.
  
 
[[Category:Game Consoles]]
 
[[Category:Game Consoles]]
 
[[Category:RGB Mods]]
 
[[Category:RGB Mods]]

Revision as of 19:09, 5 January 2018

The Super Nintendo, or SNES, was Nintendo’s follow up to the phenomenally successful NES console. Just as the NES is known as the Famicom in Japan, the Super Nintendo is known as the Super Famicom over in Japan too. While the SNES didn't gain the same levels of popularity as the original NES, it was still a very successful console globally, shifting nearly 50 million units worldwide.

Models

There were two main revisions of the hardware. The first revision outputs RGB natively, while the revised Junior or Mini edition requires a RGB mod.

Later models of the SNES and all SNES/Super Famicom Junior units are known for having a slightly sharper RGB output than earlier models. Enthusiasts refer to these better models as "1 Chip", in reference to the single RGB encoder chip present on the later design motherboards. The 1 chip revision Super Nintendo/Super Famicoms are highly sought after and many gamers will go to the effort to get a SNES/Super Famicom Junior RGB modded to ensure that they are getting a unit with the very best possible quality RGB output.

Models tested

HVC-002 (Tested with XRGB3, Mini and OSSC).

XRGB-2 Specific settings

insert data

XRGB-3 Specific settings

No special settings are required. Using a cable wired for clean composite sync, or at least luma for sync is highly recommended.

XRGB-Mini Specific settings

No special settings are required. Using a cable wired for clean composite sync, or luma for sync may occasionally be required.

OSSC Specific settings

The following settings must be used for a stable picture with the SNES on any display.

H-PLL pre-coast: 1
H-PLL post-coast: 0

SNES compatibility is often regarded as the Achilles heel of the OSSC. While every other system works with little or no fine-tuning, the SNES continues to cause problems on some displays.

Thus far, all computer monitors that have been tested work just fine with the SNES and OSSC, but a number of televisions do not. If your display constantly loses sync with your SNES when running via the OSSC, there's currently no simple workaround. You can chain your OSSC through a secondary video processor such as a DVDO Edge/VP50 or simply use another display.

A hardware mod for normalizing SNES 240p is under development. Technical details and status updates can be found in this thread.

A number of SNES games are compatible with the 256×240 optimal modes, though this does not apply to every title. If you try this setting and the image appears to be missing pixels, your game is probably running in the SNES' horizontal hi-res (512×240) screen mode and is therefore not compatible.

Reverse LPF

For multi-chip SNES consoles, the OSSCs Reverse LPF feature (under the Post Proc menu) is particularly effective. Since different SNES consoles have different amounts of blurring, a little trial and error may be required to find the perfect setting for your machine. The image below shows a before and after comparison of the reverse LPF feature.

SNES-LPF.jpeg

Reverse LPF is particularly effective when using the 256×240 optimal modes, but works in generic mode too.

Reverse LPF is not required for 1-chip SNES consoles.