Difference between revisions of "System 16"

From Classic Console Upscaler wiki
Jump to navigation Jump to search
Line 147: Line 147:
 
|}
 
|}
  
== FD1094/FD1089 Suicide battery ==
+
== Suicide battery ==
  
Some of these games have a processor labeled FD1094 or FD1089, these are 68000 processor cores with a battery and encryption keys that are used to decrypt the game at runtime. Unfortunately these batteries eventually die out and the game is rendered useless.
+
Please refer to the [[FD1094 and FD1089 suicide battery]] page for more information on this issue.
 
 
Theer are two ways of preventing this form happening. You can replace the battery inside of these, and keep doing so every 5 years in order to keep them as original as possible or you can buy/build a kit to replace the encrypted ROMs with unencrypted ones and change teh FD processor for a standard 68000 one. Please refer to teh external links section for information on these.
 
  
 
== XRGB-2 specific settings ==
 
== XRGB-2 specific settings ==
Line 196: Line 194:
  
 
* [http://www.system16.com/hardware.php?id=701 System 16B]
 
* [http://www.system16.com/hardware.php?id=701 System 16B]
* [http://www.segaresurrection.com/ Sega Resurrection] A site that sells kits to revive dead Sega boards
 
* [http://www.arcadecollecting.com/dead/dead.html The Dead Battery Society] Site with information on suicide arcade games
 
* [http://www.jamma-nation-x.com/jammax/tutorials.html JAMMA Nation X] has a tutorial to change an FD processor battery, check under Other->Misc.
 
* [http://cgfm2.emuviews.com/fdconv.php Charles MacDonald FD1094 Game Conversion] Information on how to decrypt these games by yourself
 
  
 
[[Category:Arcade PCBs]]
 
[[Category:Arcade PCBs]]

Revision as of 22:30, 27 January 2010

Sega System 16

A hardware platform by Sega, uses a 16 bit 68000 processor and most of the times an FD1094 which is a custom verison of teh same CPU. The edge connector on the PCB is not JAMMA compatible, an adapter is needed. There are two variants of the hardware: System 16A and System 16B, currently only System 16B boards have been tested.

Pinout

Solder side Pin Pin Parts side
Ground A 1 Ground
Ground B 2 Ground
+5V C 3 +5V
+5V D 4 +5V
+12V E 5 +12V
Counter 2 F 6 Counter 1
H 7
Player 2 Button 3 J 8 Player 1 Button 3
Player 2 Button 2 K 9 Player 1 Button 2
Player 2 Button 1 L 10 Player 1 Button 1
M 11
Player 2 down N 12 Player 1 down
Player 2 up P 13 Player 1 up
Player 2 right R 14 Player 1 right
Player 2 left S 15 Player 1 left
T 16
U 17
V 18
Player 1 start X 20 Coin 1
Player 2 start Y 21 Coin 2
Z 22 Test
a 23 Service
Speaker - b 24 Speaker +
Green c 25 Red
Sync d 26 Blue
Ground e 27 Ground
Ground f 28 Ground

Suicide battery

Please refer to the FD1094 and FD1089 suicide battery page for more information on this issue.

XRGB-2 specific settings

As with all arcade boards, the 220 ohm setting needs to be set because signal lines are higher than with game consoles. Just flip the switch to the PCB setting on the XRGB-2 or adjust levels from your SuperGUN if available.

The image is offset to the left with the default settings, this can be fixed by moving the H-POS value to 0 from the default 4.

XRGB-3 specific settings

As with all arcade boards, the 220 ohm setting needs to be set because signal lines are higher than with game consoles. To do this change 21ピン入力終端 from 75 オーム (75 ohm) to 220 オーム (220 ohm) under the オプション (Options) menu on the XRGB-3.

The tested PCBs showed distortion on the top 26 lines in either B0 or B1 mode as shown in the following photographs:

AlteredBeastCRT-Test-AFC-before.jpg
System16AFC-before.jpg
Altered beast CRT Test Golden Axe demo

This can be fixed by setting AFC to MANUAL and changing the default value to 3. It does fix the problem completely in B0, and almost fixes it in B1 as shown below:

AlteredBeastCRT-Test-AFC-after-B0.jpg
System16AFC-after.jpg
Altered beast CRT Test Golden Axe demo


An off/on cycle is needed sometimes after changing the AFC settings.

Games tested

  • Altered Beast (System 16B)
  • Golden Axe (System 16B)

External links