XRGB-2

From Classic Console Upscaler wiki
Revision as of 05:17, 14 January 2010 by Artemio (talk | contribs) (Created page with 'The XRGB-2 is an upscan converter by Micomsoft. It has limited capabilities when compared to the newer units such as the XRGB-2 plus and the XRGB-3, nevertheless ...')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The XRGB-2 is an upscan converter by Micomsoft. It has limited capabilities when compared to the newer units such as the XRGB-2 plus and the XRGB-3, nevertheless it offers great performance. The stability of the image is rock solid, and you usually don't need to fiddle with settings as much as with later units.

It offers no remote control, and all functiosn are available through a menu that can be accesses by the button on the right of the unit's front.

Specifications

Inputs

It also has passthrough for:

  • VGA
  • RCA Audio
  • Mini Jack

Outputs

  • VGA at 640x480 31khz
  • RGB in 15-pin D-sub (for older Japanese monitors)
  • Mini Jack for audio output

FAQ

What is the "RGB/PCB STD" switch for?

This little switch physically activate a set of 220 ohm resistors, allowing the use of arcade game pcbs on your display device.

How to reset XRGB-2

When the unit is powered down, press all four buttons (up, down, left and right) and then power on the unit. All values willl be reset to factory defaults.