Direct Video Info

From Classic Console Upscaler Wiki
Revision as of 16:23, 4 September 2024 by GabeShack (talk | contribs) (Direct Video Modes Preferred Options Table)
Jump to navigation Jump to search

Direct Video Modes

Passthru is as if the GEM had a 240p/480i output resolution option. It's a 240p/480i output mode that uses the scaler to buffer a few lines of video to stabilize the video timing *

DV1 is zero buffering and sends the native vertical resolution, usually 240p or 480i over HDMI. Horizontal resolution is multiplied to meet HDMI minimum clock frequency requirements.

FX-Direct packages the native resolution in a higher standard resolution (1280x720p) output frame that might be more compatible with switches and other equipment.

* Passthru mode requires 3.9.46.4 or greater

Direct Video Modes Lag or Latency

DV1 = zero lag

Passthru = line doubler

FX-Direct = typical scaler line latency

Direct Video Modes Preferred Options Table

The below chart assumes the device is running direct to the upscaler, and the recommendations may change based on switches or splitters inserted in between.

Check the hdmi switch reference guide for compatibility.


Upscalers and Systems
Video Mode PixelFX System Morph4K RetroTink4k OSSC Pro Reported By
FX-Direct PS1Digital
N64 Digital
DCDigital
PS1 GEM
PS2 GEM
N64 GEM
DC GEM
MiSTer
DV1 PS1Digital miba (dv1 ossc pro)
N64 Digital 👍
DCDigital 👍
PS1 GEM 👍
PS2 GEM 👍
N64 GEM 👍
DC GEM 👍
MiSTer 👍 👍
Passthru PS1Digital 👍 👍 pelvicthrustman (ps1d rt4k)/BuckoVGP(OSSC Pro 60hz Good image if pixel de-repetition is set manually to 2)
N64 Digital miba (passthru ossc pro)
DCDigital
PS1 GEM
PS2 GEM
N64 GEM
DC GEM
MiSTer

✅ = Supported

👍 = Recommended Setting

🤷 = Not Tested

❌ = Not Supported

• PS1Digital may have issues with DV1