Direct Video Info

From Classic Console Upscaler Wiki
Revision as of 03:53, 5 September 2024 by GabeShack (talk | contribs) (Direct Video Modes Preferred Options Table)
Jump to navigation Jump to search

Direct Video Modes

Passthru is as if the GEM had a 240p/480i output resolution option. It's a 240p/480i output mode that uses the scaler to buffer a few lines of video to stabilize the video timing *

DV1 is zero buffering and sends the native vertical resolution, usually 240p or 480i over HDMI. Horizontal resolution is multiplied to meet HDMI minimum clock frequency requirements.

FX-Direct packages the native resolution in a higher standard resolution (1280x720p) output frame that might be more compatible with switches and other equipment.

* Passthru mode requires 3.9.46.4 or greater

Direct Video Modes Lag or Latency

DV1 = zero lag

Passthru = line doubler

FX-Direct = typical scaler line latency

Direct Video Modes Preferred Options Table

(Last Updated 09/04/2024)

The below chart assumes the device is running direct to the upscaler, and the recommendations may change based on switches or splitters inserted in between.

Check the hdmi switch reference guide for compatibility.


✅ = Supported

👍 = Recommended Setting for each scaler

🤷 = Not Tested

❌ = Not Supported

• PS1Digital may have issues with DV1


Upscalers and Systems
Video Mode PixelFX System Morph4K RetroTink4k OSSC Pro Reported By/Notes
FX-Direct PS1Digital 🤷
N64Digital 🤷
DCDigital 🤷
PS1 GEM 🤷
PS2 GEM 🤷
N64 GEM 🤷
DC GEM 🤷
MiSTer
DV1 PS1Digital miba (dv1 ossc pro)
N64Digital 👍
DCDigital 👍
PS1 GEM 👍 BuckoA51(Matt From VGP)(60hz Can't get a stable image OSSC Pro)
PS2 GEM 👍
N64 GEM 👍
DC GEM 👍
MiSTer 👍 👍 👍
Passthru PS1Digital 👍 👍 👍 pelvicthrustman (ps1d rt4k)/BuckoA51(Matt From VGP) (60hz Works, needs pixel repetition set to 2 manually on OSSC Pro)
N64Digital 👍 miba (passthru ossc pro)
DCDigital 👍 🤷
PS1 GEM 👍 👍 BuckoA51(Matt From VGP)(Works, needs pixel repetition set to 2 manually on OSSC Pro)
PS2 GEM 👍 🤷
N64 GEM 👍 🤷
DC GEM 👍 🤷
MiSTer