Difference between revisions of "PolyGame Master"
								
								Jump to navigation
				Jump to search
				
				
		
					
								
							
		|  (→4 player harness pinout) | |||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| Also known as PGM, is a system created by IGS. One thing to note is that [[JAMMA]] pins ''c'' and ''25'' are used for the fourth button of player 2 and 1 respectively, just as in [[Neo Geo MVS]] | Also known as PGM, is a system created by IGS. One thing to note is that [[JAMMA]] pins ''c'' and ''25'' are used for the fourth button of player 2 and 1 respectively, just as in [[Neo Geo MVS]] | ||
| − | == 4 player pinout == | + | == 4 player harness pinout == | 
| The [[JAMMA+]] harness found in PGM boards is a 34 pin IDE connector. The following pinout shows the connector from the system side. | The [[JAMMA+]] harness found in PGM boards is a 34 pin IDE connector. The following pinout shows the connector from the system side. | ||
| Line 14: | Line 14: | ||
| ! scope=col | Bottom row | ! scope=col | Bottom row | ||
| |- | |- | ||
| − | |   | + | | GND | 
| |1 | |1 | ||
| |2 | |2 | ||
| − | |   | + | | Speaker + | 
| |- | |- | ||
| − | |  | + | | GND	 | 
| |3 | |3 | ||
| |4 | |4 | ||
| − | |   | + | | Speaker + | 
| |- | |- | ||
| − | |   | + | | Blue | 
| |5 | |5 | ||
| |6 | |6 | ||
| − | |   | + | | Green | 
| |- | |- | ||
| − | |   | + | | Red | 
| |7 | |7 | ||
| |8 | |8 | ||
| − | |   | + | | GND | 
| |- | |- | ||
| − | | | + | | GND | 
| |9 | |9 | ||
| |10 | |10 | ||
| − | | | + | | Sync | 
| |- | |- | ||
| − | | | + | | Coin counter 1 | 
| |11 | |11 | ||
| |12 | |12 | ||
| − | | | + | | Coin counter 2 | 
| |- | |- | ||
| | Test | | Test | ||
| Line 101: | Line 101: | ||
| |} | |} | ||
| + | This port can be used with a JAMMA 4 player extension cable for two cabinets, or with controllers wired to the harness. | ||
| == External Links == | == External Links == | ||
Latest revision as of 18:38, 10 March 2019
Also known as PGM, is a system created by IGS. One thing to note is that JAMMA pins c and 25 are used for the fourth button of player 2 and 1 respectively, just as in Neo Geo MVS
4 player harness pinout
The JAMMA+ harness found in PGM boards is a 34 pin IDE connector. The following pinout shows the connector from the system side.
| Top row | Pin | Pin | Bottom row | 
|---|---|---|---|
| GND | 1 | 2 | Speaker + | 
| GND | 3 | 4 | Speaker + | 
| Blue | 5 | 6 | Green | 
| Red | 7 | 8 | GND | 
| GND | 9 | 10 | Sync | 
| Coin counter 1 | 11 | 12 | Coin counter 2 | 
| Test | 13 | 14 | Service | 
| Player 3 Button D | 15 | 16 | Player 4 Button D | 
| Player 3 Button C | 17 | 18 | Player 4 Button C | 
| Player 3 Button B | 19 | 20 | Player 4 Button B | 
| Player 3 Button A | 21 | 22 | Player 4 Button A | 
| Player 3 Right | 23 | 24 | Player 4 Right | 
| Player 3 Left | 25 | 26 | Player 4 Left | 
| Player 3 Down | 27 | 28 | Player 4 Down | 
| Player 3 Up | 29 | 30 | Player 4 Up | 
| Player 3 Start | 31 | 32 | Player 4 Start | 
| Player 3 Coin | 33 | 34 | Player 4 Coin | 
This port can be used with a JAMMA 4 player extension cable for two cabinets, or with controllers wired to the harness.


