Difference between revisions of "XRGB-1"
(→Capacitor List) |
(→Outputs) |
||
| (13 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | [[File:xrgb-1front.jpg|300px|thumb|right|XRGB-1 Front]] | ||
| + | [[File:xrgb-1back.jpg|300px|thumb|right|XRGB-1 Back]] | ||
| + | [[File:Xrgb1box.png|300px|thumb|middle|XRGB-1 Box]] | ||
The first device in the line of [[XRGB]] [[upscan]] converters. It has four dip switches for changing configurations, and potentiometers to adjust colors and brightness. | The first device in the line of [[XRGB]] [[upscan]] converters. It has four dip switches for changing configurations, and potentiometers to adjust colors and brightness. | ||
| + | |||
== Dip switches == | == Dip switches == | ||
| Line 22: | Line 26: | ||
(*) note that only V2.2 PCB has DIP switch for Normal / Narrow, the V1.1 PCB only has three DIP switches. | (*) note that only V2.2 PCB has DIP switch for Normal / Narrow, the V1.1 PCB only has three DIP switches. | ||
| + | |||
| + | [[File:Xrgb1dipswitches.jpg]] | ||
== Specifications == | == Specifications == | ||
| Line 37: | Line 43: | ||
* RGB in 15-pin D-sub (for older Japanese monitors, can be connected to VGA via special cable) | * RGB in 15-pin D-sub (for older Japanese monitors, can be connected to VGA via special cable) | ||
* RCA stereo out | * RCA stereo out | ||
| + | |||
| + | [[File:Sanwaad-d15ne.jpg|80px|thumb|right|Sanwa<br> AD-D15NE]] | ||
| + | |||
| + | |||
| + | Note! 15-pin D-sub adapter to 9-pin D-sub (standard VGA connector) use Sanwa AD-D15NE (can also be used on the input). | ||
| + | <br> | ||
| + | <br> | ||
| + | <br> | ||
| + | <br> | ||
| + | <br> | ||
| + | <br> | ||
| + | <br> | ||
== Capacitor List == | == Capacitor List == | ||
| Line 129: | Line 147: | ||
|} | |} | ||
| − | Note! the bigger 100uF are the ones that leak first (V1.1 C97,54) | + | Note! the bigger 100uF are the ones that leak first (V1.1 C97,54), V2.2 seems less susceptible for leaking caps. |
| + | |||
| + | [[File:Xrgb1pcb11.jpg]] | ||
| + | [[File:Xrgb1pcb22.jpg]] | ||
| + | |||
| + | == Power Adapter == | ||
| + | |||
| + | There are two known variations shipped in the box, the 500mA version seemed to been with the earlier ones and 300mA with the later revisions. | ||
| + | |||
| + | JOD-41-051 (91-53131) 500mA<br> | ||
| + | JOD-2053 (91-57573) 300mA | ||
| + | |||
| + | [[File:poweradapterxrgb1models.jpg]] | ||
== External links == | == External links == | ||
| + | |||
| + | [http://www.retrosampling.se/Temp/XRGB_MANUALS/Micomsoft%20XRGB-1%20-%20Manual.pdf MANUAL (JP)]<br> | ||
[http://www.ncsx.com/www/ncs1201/xrgb-1.htm NCSX XRGB-1 page] | [http://www.ncsx.com/www/ncs1201/xrgb-1.htm NCSX XRGB-1 page] | ||
[[Category:Upscan Converters]] | [[Category:Upscan Converters]] | ||
Latest revision as of 18:52, 10 August 2018
The first device in the line of XRGB upscan converters. It has four dip switches for changing configurations, and potentiometers to adjust colors and brightness.
Contents
Dip switches
| Values | Description |
|---|---|
| 15 kHz / 31 kHz | Adjust output scan rate |
| NTSC / PCB | 75 ohm / 220 ohm setting |
| FM Towns /Normal | Special setting for FM towns computer |
| Normal / Narrow | Control aspect ratio (*) |
(*) note that only V2.2 PCB has DIP switch for Normal / Narrow, the V1.1 PCB only has three DIP switches.
Specifications
Inputs
Outputs
- RGB in 15-pin D-sub (for older Japanese monitors, can be connected to VGA via special cable)
- RCA stereo out
Note! 15-pin D-sub adapter to 9-pin D-sub (standard VGA connector) use Sanwa AD-D15NE (can also be used on the input).
Capacitor List
| Ver 1.1 PCB | Ver 2.2 PCB |
|---|---|
| SMD: C1 100uF/16V HOLE: |
HOLE:
C43 470uF/16V |
Note! the bigger 100uF are the ones that leak first (V1.1 C97,54), V2.2 seems less susceptible for leaking caps.
Power Adapter
There are two known variations shipped in the box, the 500mA version seemed to been with the earlier ones and 300mA with the later revisions.
JOD-41-051 (91-53131) 500mA
JOD-2053 (91-57573) 300mA
