Xbox

Models

insert data

Models tested

insert data

XRGB-2 Specific settings

insert data

XRGB-3 Specific settings

insert data

XRGB-Mini Specific settings

insert data

OSSC Specific settings

No special settings are required for basic functionality.

The OSSC can however be set up to perform NTSC square pixel sampling. This is especially useful for 4x mode with 480i signals and 2x mode with 480p signals. With these settings, the sampling matches the pixel clock in games running square pixel 640x480 resolution and maintains a correct 4:3 aspect ratio; the latter also with games that run in non-square 720x480 resolution (at the cost of a 2% horizontal crop). It can also be used for 2x mode with 480i signals and passthru mode with 480p signals if desired.

Note that compatibility with these settings can vary between displays.

NSTC Square pixel settings

In Sampling opt. menu

Option	Setting	Notes
Allow upsample2x	On	This is optional but recommended to improve clarity in games that use 720x480 resolution.

In Adv. timing sub menu

Setting	480i	480p	Notes
H. samplerate	780	780
H. s.rate frac	.00	.00
H. synclen	58	58
H. backporch	60	60	Might need to be adjusted up or down a step or two to center the picture.
H. active	640	640
V. synclen	3	6
V. backporch	16	32	Might need to be adjusted up or down a step or two to center the picture.
V. active	240	480