Direct Video Info

Direct Video Modes

Passthru is as if the GEM had a 240p/480i output resolution option. It's a 240p/480i output mode that uses the scaler to buffer a few lines of video to stabilize the video timing *

DV1 is zero buffering and sends the native vertical resolution, usually 240p or 480i over HDMI. Horizontal resolution is multiplied to meet HDMI minimum clock frequency requirements.

FX-Direct packages the native resolution in a higher standard resolution (1280x720p) output frame that might be more compatible with switches and other equipment.

* Passthru mode requires 3.9.46.4 or greater

Direct Video Modes Lag or Latency

DV1 = zero lag

Passthru = line doubler

FX-Direct = typical scaler line latency

Direct Video Modes Preferred Options Table

The below chart assumes the device is running direct to the upscaler, and the recommendations may change based on switches or splitters inserted in between.

Check the hdmi switch reference guide for compatibility.

Upscalers and Systems

Video Mode	PixelFX System	Morph4K	RetroTink4k	OSSC Pro	Reported By
FX-Direct	PS1Digital	✅	❌	❌
	N64 Digital	✅	❌	❌
	DCDigital	✅	❌	❌
	PS1 GEM	✅	❌	❌
	PS2 GEM	✅	❌	❌
	N64 GEM	✅	❌	❌
	DC GEM	✅	❌	❌
	MiSTer	❌	❌	❌
DV1	PS1Digital	•	•	❌	miba (dv1 ossc pro)
	N64 Digital	✅	👍	✅
	DCDigital	✅	👍	✅
	PS1 GEM	✅	👍	❌	BuckoA51(Matt From VGP)(60hz Can't get a stable image OSSC Pro)
	PS2 GEM	✅	👍	✅
	N64 GEM	✅	👍	✅
	DC GEM	✅	👍	✅
	MiSTer	👍	👍	👍
Passthru	PS1Digital	👍	👍	👍	pelvicthrustman (ps1d rt4k)/BuckoA51(Matt From VGP) (60hz Works, needs pixel repetition set to 2 manually on OSSC Pro)
	N64 Digital	👍	✅	✅	miba (passthru ossc pro)
	DCDigital	👍	✅	🤷
	PS1 GEM	👍	✅	👍	BuckoA51(Matt From VGP)(Works, needs pixel repetition set to 2 manually on OSSC Pro)
	PS2 GEM	👍	✅	🤷
	N64 GEM	👍	✅	🤷
	DC GEM	👍	✅	🤷
	MiSTer	❌	❌	❌

✅ = Supported

👍 = Recommended Setting for each scaler

🤷 = Not Tested

❌ = Not Supported

• PS1Digital may have issues with DV1