Difference between revisions of "Playstation 3"
(Included PS3 details for Morph and a summary of HDCP limitations) |
m |
||
| Line 16: | Line 16: | ||
insert data | insert data | ||
| − | === Models | + | === Models Tested === |
* CECH-2003A through HDMI | * CECH-2003A through HDMI | ||
| − | == [[XRGB-2]] Specific | + | == [[XRGB-2]] Specific Settings == |
insert data | insert data | ||
| − | == [[XRGB-3]] Specific | + | == [[XRGB-3]] Specific Settings == |
insert data | insert data | ||
| − | == [[XRGB-Mini]] Specific | + | == [[XRGB-Mini]] Specific Settings == |
The following settings are recommended for upscaling 720p to 1080p (tested with the Mini's HDMI input): | The following settings are recommended for upscaling 720p to 1080p (tested with the Mini's HDMI input): | ||
| Line 41: | Line 41: | ||
[[Category:RGB Mods]] | [[Category:RGB Mods]] | ||
| − | == Morph 4K == | + | == [[Morph 4K]] Specific Settings == |
The PS3 supports native 1080p, although most PS3 games output in 720p. Make sure the PS3 resolution options have 720p and 1080p enabled. The PS3 will output at the maximum resolution supported by each game. | The PS3 supports native 1080p, although most PS3 games output in 720p. Make sure the PS3 resolution options have 720p and 1080p enabled. The PS3 will output at the maximum resolution supported by each game. | ||
Latest revision as of 18:01, 22 October 2024
Every consumer PS3 has HDCP built-in and it cannot be disabled. Although PS3 developer units do not have HDCP built-in, they lack the ability to play DVD and Blu-ray discs.
If you plan to use one of the scalers below with a PS3, then you must bypass HDCP with an intermediary device (PS3 > Device > Scaler). Ways to achieve this:
- An HDMI 1x2 splitter or 1x1 audio extractor (digital-to-digital)
- A component video cable or adapter (analog-to-digital)
Aside from the cost effective options above, there is also an HDCP Doctor aka HDfury (digital-to-digital). This would decrypt/encrypt using a custom firmware, but it's very expensive.
Contents
Models
insert data
Models Tested
- CECH-2003A through HDMI
XRGB-2 Specific Settings
insert data
XRGB-3 Specific Settings
insert data
XRGB-Mini Specific Settings
The following settings are recommended for upscaling 720p to 1080p (tested with the Mini's HDMI input):
- H_SCALER = 6
- V_SCALER = 5
- SHARPNESS = 0 or 1 (0 recommended)
NOTE: Even if 1080p is enabled as an output resolution, most PS3 games will choose a 720p output mode.
Morph 4K Specific Settings
The PS3 supports native 1080p, although most PS3 games output in 720p. Make sure the PS3 resolution options have 720p and 1080p enabled. The PS3 will output at the maximum resolution supported by each game.
Video > Scaler
- Aspect Ratio: Auto
- Horiz. Prescale: Auto (/1)
- Vert. Prescale: Auto (/1)
Video > Output Resolution
- 4K (3840x2160)
