Difference between revisions of "XRGB-2"

From Classic Console Upscaler Wiki
Jump to navigation Jump to search
(Created page with 'The XRGB-2 is an upscan converter by Micomsoft. It has limited capabilities when compared to the newer units such as the XRGB-2 plus and the XRGB-3, nevertheless ...')
 
Line 1: Line 1:
 
The [[XRGB-2]] is an upscan converter by [[Micomsoft]]. It has limited capabilities when compared to the newer units such as the [[XRGB-2 plus]] and the [[XRGB-3]], nevertheless it offers great performance. The stability of the image is rock solid, and you usually don't need to fiddle with settings as much as with later units.
 
The [[XRGB-2]] is an upscan converter by [[Micomsoft]]. It has limited capabilities when compared to the newer units such as the [[XRGB-2 plus]] and the [[XRGB-3]], nevertheless it offers great performance. The stability of the image is rock solid, and you usually don't need to fiddle with settings as much as with later units.
  
−
It offers no remote control, and all functiosn are available through a menu that can be accesses by the button on the right of the unit's front.  
+
It offers no remote control, and all functiosn are available through five buttons on the unit's front.  
 +
 
 +
== Menu ==
 +
 
 +
{| class="wikitable" style="text-align:center; width:40%;"
 +
|-
 +
! scope=col | Japanese
 +
! scope=col | English
 +
! scope=col | Setting
 +
! scope=col | Default setting
 +
! scope=col | Use
 +
|-
 +
|明るさ
 +
|Brightness
 +
|0 - 62
 +
|41
 +
|Adjust Brightness
 +
|-
 +
|
 +
|BLUE
 +
|0 - 62
 +
|31
 +
|Adjust blue
 +
|-
 +
|
 +
|GREEN
 +
|0 - 62
 +
|31
 +
|Adjust green
 +
|-
 +
|
 +
|H_POS
 +
|0 - 7
 +
|4
 +
|Adjust horizontal position
 +
|-
 +
|
 +
|BLACK
 +
|0 - 62
 +
|0
 +
|Adjust black level
 +
|-
 +
|
 +
|GAMMA
 +
|OFF 1 2 3 4
 +
|OFF
 +
|Adjust gamma
 +
|-
 +
|
 +
|USE_CH
 +
|S+VIDEO S VIDEO
 +
|S+VIDEO
 +
|
 +
|-
 +
|
 +
|V_SYNC
 +
|AUTO 50HZ 60HZ
 +
|AUTO
 +
|
 +
|-
 +
|
 +
|AFC
 +
|0 - 8
 +
|0
 +
|
 +
|-
 +
|
 +
|DTC_TYP
 +
|NTSC PS USER
 +
|NTSC
 +
|
 +
|-
 +
|
 +
|USR_DTC
 +
|1 - 62
 +
|59
 +
|
 +
|-
 +
|
 +
|V_LINE
 +
|OFF ON
 +
|OFF
 +
|Scanlines
 +
|}
 +
 
  
 
== Specifications ==
 
== Specifications ==

Revision as of 05:36, 14 January 2010

The XRGB-2 is an upscan converter by Micomsoft. It has limited capabilities when compared to the newer units such as the XRGB-2 plus and the XRGB-3, nevertheless it offers great performance. The stability of the image is rock solid, and you usually don't need to fiddle with settings as much as with later units.

It offers no remote control, and all functiosn are available through five buttons on the unit's front.

Menu

Japanese English Setting Default setting Use
明るさ Brightness 0 - 62 41 Adjust Brightness
BLUE 0 - 62 31 Adjust blue
GREEN 0 - 62 31 Adjust green
H_POS 0 - 7 4 Adjust horizontal position
BLACK 0 - 62 0 Adjust black level
GAMMA OFF 1 2 3 4 OFF Adjust gamma
USE_CH S+VIDEO S VIDEO S+VIDEO
V_SYNC AUTO 50HZ 60HZ AUTO
AFC 0 - 8 0
DTC_TYP NTSC PS USER NTSC
USR_DTC 1 - 62 59
V_LINE OFF ON OFF Scanlines


Specifications

Inputs

It also has passthrough for:

  • VGA
  • RCA Audio
  • Mini Jack

Outputs

  • VGA at 640x480 31khz
  • RGB in 15-pin D-sub (for older Japanese monitors)
  • Mini Jack for audio output

FAQ

What is the "RGB/PCB STD" switch for?

This little switch physically activate a set of 220 ohm resistors, allowing the use of arcade game pcbs on your display device.

How to reset XRGB-2

When the unit is powered down, press all four buttons (up, down, left and right) and then power on the unit. All values willl be reset to factory defaults.

Retrieved from "http://junkerhq.net//xrgb/index.php?title=XRGB-2&oldid=325"