Sega Genesis

From Classic Console Upscaler Wiki
Revision as of 18:43, 10 February 2014 by BuckoA51 (talk | contribs) (→‎XRGB-Mini Specific settings: - Sync cleaner no longer needed)
Jump to navigation Jump to search

XRGB-3 Specific settings

It is strongly recommended to use a cable or modified console that outputs pure/raw sync. Raw sync cables for both Genesis/Megadrive 1 and 2 can be obtained online. If you do not use raw sync, you may find that the picture blanks when the screen becomes bright.

Because the video clocks on NTSC and PAL consoles are different, you are strongly advised to use a genuine NTSC Genesis/Megadrive rather than a modded PAL unit. Using a PAL unit forced into 60hz can cause stuttering or other problems with sync.

XRGB-Mini Specific settings

Picture quality may be improved by using pure/raw sync cables.

Because the video clocks on NTSC and PAL consoles are different, you are strongly advised to use a genuine NTSC Genesis/Megadrive rather than a modded PAL unit. Using a PAL unit forced into 60hz can cause stuttering or other problems with sync. PAL60 handling is improved in firmware 1.07 but is still not as good as using a genuine NTSC console.

Megadrive titles which run in 480i or 576i rather than 240p/288p are currently incompatible with the XRGB Mini for unknown reasons.

Retrieved from "http://junkerhq.net//xrgb/index.php?title=Sega_Genesis&oldid=1618"