CPS-II
Capcom System II is an arcade platform developed and used by Capcom. It consists of two boards, named A and B. The A board is the base of the system, and contains the CPU, DSPs, JAMMA connector, a JAMMA + harness and stereo RCA connectors for use with a QSound amplifier. The B board goes on top using four connectors and holds all the game data.
Contents
Compatibility
Harness
XRGB-2 Specific settings
XRGB-3 Specific settings
As usual with arcade boards, you'll need to set the 220 ohm setting or adjust your potentiometers if your SuperGUN has the controls.
CPS-2 also presents slight distortion on the top 18 lines. To fix this set AFC to manual and AFC level to 3. LPF might also be needed but it commonly isn't.
Here are pictures detailing the distortion on teh top lines before and after adjusting AFC level.
| AFC at default 2 | AFC manual and level at 3 |
Tested games
Since the platform is basically the same with minor revisions and since a considerable number of games have been tested, it can be safely assumed that they are valid across all boards.
- 19XX: The War Against Destiny
- Alien Vs. Predator
- Dark Stalkers: The Night Warriors
- Dungeons & Dragons: Shadow Over Mystara
- Dungeons & Dragons: Tower Of Doom
- Hyper Street Fighter II: Anniversaty Edition
- Marvel Super Heroes Vs. Street Fighter
- Marvel Vs. Capcom
- Mighty! Pang
- Rockman 2: The Power Fighters
- Rockman: The Power Battle
- Street Fighter ALpha 2
- Street Fighter ALpha 3
- Super Puzzle Fighter II Turbo
- Super Street Fighter II - The New Challengers
- Pocket Fighter
- Vampire Hunter
- Vampire Savior: The Lord Of Vampire
