MiSTer FPGA
Settings below account for both MiSTer and MiSTer Pi.
Relevant Links:
Where to buy?
Contents
Direct Video (DV1)
Use latest MiSTer.ini file and enable DV1 (direct_video). More details on MiSTer INI settings can be found here.
direct_video=1 |
Cores Lacking Direct Video Support
Some arcade cores do not support direct video. To turn off direct video for these cores alone, add this to the bottom of MiSTer.ini:
Cores List | |
---|---|
[ao486] |
Morph 4K Specific Settings
Morph 4K supports DV1 from MiSTer FPGA. Make sure Morph 4K is on the latest firmware before proceeding.
Video > Advanced Video
- RX DV1: on
DV1 Config Files for MiSTer Cores
Since some cores do not supply complete DV1 metadata, a custom DV1 configuration file may be required. This .ini
file can be placed in a folder called dv1 on the root of the Morph 4K microSD. A single file can hold multiple configurations, or there can be multiple files with single configurations in each. More details on the format of these Morph .ini
files can be found here.
Link | MiSTer Cores | Contributor | Last Updated |
---|---|---|---|
Jaleco.zip | Jaleco Mega System 1 | Gaw | 01-12-2025 |
MCR3.zip | MCR3(Scroll)[1] | JesusBurnsNeon | 01-12-2025 |
Nichibutsu AF.zip* | Nichibutsu (Armed F) | JesusBurnsNeon | 01-12-2025 |
Nichibutsu TC.zip* | Nichibutsu (Terra Cresta) | JesusBurnsNeon | 01-12-2025 |
Raizing.zip* | Raizing Toaplan v2 | JesusBurnsNeon | 01-12-2025 |
SNK M68000.zip* | SNK M68000[2][3][4] | JesusBurnsNeon | 01-12-2025 |
Toaplan v1.zip* | Toaplan v1[5][6][7] | JesusBurnsNeon | 01-12-2025 |
Toaplan v2.zip* | Toaplan v2 | JesusBurnsNeon | 01-12-2025 |
* Requires Morph firmware 3.9.46.134 or greater. Some have a short ROM RAM check sequence. With Raizing, allow 1-5 mins for the ROM RAM check to pass before the core loads.
Analogue & OpenFPGA
Applies to all Analogue devices (Mega Sg, Super Nt, Analogue Pocket Dock)
Morph 4K Specific Settings
Video > Advanced Video
- RX EDID: h-dac.bin