System 16

File:System16 AlteredBeast.jpg

Sega System 16

A hardware platform by Sega, uses a 16 bit 68000 processor. The edge connector on the PCB is not JAMMA compatible, an adapter is needed.

Games tested

• Altered Beast
• Golden Axe

Pinout

SOLDER SIDE                          COMP SIDE
-----------------------------------------------------       
A  GND                              1   GND
B  GND                              2   GND
C  +5V                              3   +5V
D  +5V                              4   +5V
E  +12V                             5   +12V
F  CTR 2                            6   CTR 1
H                                   7                                  
J  P2 Button 3                      8   P1 Button 3
K  P2 Button 2                      9   P1 Button 2
L  P2 Button 1                     10   P1 Button 1
M                                  11
N  PL 2 DOWN                       12   PL 1 DOWN
P  PL 2 UP                         13   PL 1 UP
R  PL 2 RIGHT                      14   PL 1 RIGHT
S  PL 2 LEFT                       15   PL 1 LEFT
T                                  16
U                                  17
V                                  18
X  1 PL START                      20   COIN 1
Y  2 PL START                      21   COIN 2
Z                                  22   TEST
a                                  23   SVC
b  SP-                             24   SP+
c  VID GN                          25   VID RED
d  SYNC                            26   VID BL
e  GND                             27   GND
f  GND                             28   GND

XRGB-3 specific settings

The tested PCBs showed distortion on the top 26 lines in either B0 or B1 mode as shown in the following photograph:

Sega System 16 distortion

This can be fixed by setting AFC to MANUAL and changing the default value to 3. It does fix the problem completely in B0, but not in B1 as shown below:

Sega System 16 distortion

An off/on cycle is needed sometimes after changing the AFC settings.