Difference between revisions of "CPS-II"

From Classic Console Upscaler wiki
Jump to navigation Jump to search
Line 240: Line 240:
 
As usual with arcade [[pcb | boards]], you'll need to set the 220 ohm setting or adjust your potentiometers if your [[SuperGUN]] has the controls.
 
As usual with arcade [[pcb | boards]], you'll need to set the 220 ohm setting or adjust your potentiometers if your [[SuperGUN]] has the controls.
  
CPS-2 also presents slight distortion on the top 18 lines. To fix this set AFC to manual and AFC level to 3. LPF might also be needed but it commonly isn't.
+
CPS-2 also presents slight distortion on the top 18 lines. To fix this set AFC to manual and AFC level to 3. LPF might also be needed but it commonly isn't. This wokrs on B0 and B1 mode, a reboot of teh XRGB-3 might be needed after setting AFC level.
 +
 
 +
Enabling V-Sync Lock in B0 mode makes the TV loose the signal from the XRGB-3 on an LN46a950, can be fixed by selecting a different input and disabling V-Sync Lock.
  
 
Here are pictures detailing the distortion on teh top lines before and after adjusting AFC level.
 
Here are pictures detailing the distortion on teh top lines before and after adjusting AFC level.

Revision as of 19:38, 17 January 2010

Capcom System II is an arcade platform developed and used by Capcom. It consists of two boards, named A and B. The A board is the base of the system, and contains the CPU, DSPs, JAMMA connector, a JAMMA+ harness and stereo RCA connectors for use with a QSound amplifier. The B board goes on top using four connectors and holds all the game data.

Compatibility between boards

There are two kind of conenctors in teh boards, these make the games physically incompatible between certrain regions. The boarda are colores to reflect their region, and thus their compatibility in general terms. However, there are boards that have been officially adapted for a different region than the one identified by the color.

Regions are:

Color Region Compatible with
Blue USA Japan
Green Japan USA
Yellow Japan (Rental Only) USA
Orange Hispanic Asia
Gray Asia Hispanic

There are also black metal boards, which are a complete system and thus, they have no A and B parts.

Harness

The JAMMA + harness found in CPS-2 boards is 34 pins in two rows. It is multipurpose and teh game might use it for different input options. It is most commonly used as a Kick harness, extending the JAMMA 3 buttons per player to 6 buttons, and is commonly used in fighting games.

Top row Pin Pin Bottom row
1 2
3 4
5 6
7 8
Player 2 Button 6 9 10
11 12
13 14
Player 1 Button 6 15 16
Player 1 Button 5 17 18
Player 1 Button 4 19 20
Player 2 Button 4 21 22
Player 2 Button 5 23 24
25 26
27 28
Volume Up 29 30 Volume Down
Volume Ground 31 32
Kick Ground 2 33 34 Kick Ground 1


It can also be used for and 3rd and even 4th player, Alien Vs. Predator and the Dungeons & Dragons games use the port for this purpose.

Top row Pin Pin Bottom row
Ground 1 2 Ground
3 4
+12V 5 6 +12V
Player 3 Coin Lock 7 8 Player 4 Coin Lock
Player 3 Coin 9 10 Player 4 Coin
Player 3 Start 11 12 Player 4 Start
Player 3 Up 13 14 Player 4 Up
Player 3 Down 15 16 Player 4 Down
Player 3 Left 17 18 Player 4 Left
Player 3 Right 19 20 Player 4 Right
Player 3 Button 1 21 22 Player 4 Button 1
Player 3 Button 2 23 24 Player 4 Button 2
Player 3 Button 3 25 26 Player 4 Button 3
Player 3 Button 4 27 28 Player 4 Button 4
Volume Up 29 30 Volume Down
Volume Ground 31 32
Ground Player 3 33 34 Ground Player 4

The volume up and down buttons in the harness have the same effect as the ones in the board.

The harness is compatible with the Sega Naomi I/O board by Capcom and CPS-3 games.

XRGB-2 Specific settings

XRGB-3 Specific settings

As usual with arcade boards, you'll need to set the 220 ohm setting or adjust your potentiometers if your SuperGUN has the controls.

CPS-2 also presents slight distortion on the top 18 lines. To fix this set AFC to manual and AFC level to 3. LPF might also be needed but it commonly isn't. This wokrs on B0 and B1 mode, a reboot of teh XRGB-3 might be needed after setting AFC level.

Enabling V-Sync Lock in B0 mode makes the TV loose the signal from the XRGB-3 on an LN46a950, can be fixed by selecting a different input and disabling V-Sync Lock.

Here are pictures detailing the distortion on teh top lines before and after adjusting AFC level.

CPS2-AFC-before.jpg
CPS2-AFC-after.jpg
AFC at default 2 AFC manual and level at 3


Tested games

Since the platform is basically the same with minor revisions and since a considerable number of games have been tested, it can be safely assumed that they are valid across all boards.

  • 19XX: The War Against Destiny
  • Alien Vs. Predator
  • Dark Stalkers: The Night Warriors
  • Dungeons & Dragons: Shadow Over Mystara
  • Dungeons & Dragons: Tower Of Doom
  • Hyper Street Fighter II: Anniversaty Edition
  • Marvel Super Heroes Vs. Street Fighter
  • Marvel Vs. Capcom
  • Mighty! Pang
  • Rockman 2: The Power Fighters
  • Rockman: The Power Battle
  • Street Fighter Alpha 2
  • Street Fighter Alpha 3
  • Super Puzzle Fighter II Turbo
  • Super Street Fighter II - The New Challengers
  • Pocket Fighter
  • Vampire Hunter
  • Vampire Savior: The Lord Of Vampire

External Links

CPS Shock