Difference between revisions of "Playstation 3"

From Classic Console Upscaler Wiki
Jump to navigation Jump to search
(Created page with "== Models == insert data === Models tested === insert data == XRGB-2 Specific settings == insert data == XRGB-3 Specific settings == insert data == [[XRGB-Mini...")
 
m
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
Every consumer PS3 has HDCP built-in and it cannot be disabled.  Although PS3 developer units do not have HDCP built-in, they lack the ability to play DVD and Blu-ray discs.
 +
 +
If you plan to use one of the scalers below with a PS3, then you must bypass HDCP with an intermediary device (''PS3 > Device > Scaler'').  Ways to achieve this:
 +
 +
* An HDMI 1x2 splitter or 1x1 audio extractor (digital-to-digital)
 +
:* [https://www.easycoolav.com/products/4k60-hdmi-audio-extractor-with-scaler-and-edid-setting Suggested Audio Extractor] and [https://www.amazon.com/Splitter-Extractor-Down-Scale-Breakout-embedder/dp/B07TZRXKYG Amazon link]
 +
:* [https://www.easycoolav.com/products/4k60-hdmi-splitter-1x2-dolby-vision-hdr-scaler-edid-setting-sp12h2 Suggested HDMI Splitter] and [https://www.amazon.com/Splitter-l-b-y-Vision-Atmos-Scaler/dp/B07VP37KMB Amazon link]
 +
* A component video cable or adapter (analog-to-digital)
 +
:* [https://electron-shepherd.com/collections/all/products/electronpulse ElectronPulse]
 +
:* [https://www.hdretrovision.com/other-consoles#ps2 HD Retrovision Cables]
 +
 +
Aside from the cost effective options above, there is also an HDCP Doctor aka HDfury (digital-to-digital).  This would decrypt/encrypt using a custom firmware, but it's very expensive.
 +
 
== Models ==
 
== Models ==
  
 
insert data
 
insert data
  
=== Models tested ===
+
=== Models Tested ===
 +
 
 +
* CECH-2003A through HDMI
 +
 
 +
== [[XRGB-2]] Specific Settings ==
  
 
insert data
 
insert data
  
== [[XRGB-2]] Specific settings ==
+
== [[XRGB-3]] Specific Settings ==
  
 
insert data
 
insert data
  
== [[XRGB-3]] Specific settings ==
+
== [[XRGB-Mini]] Specific Settings ==
  
insert data
+
The following settings are recommended for upscaling 720p to 1080p (tested with the Mini's HDMI input):
  
== [[XRGB-Mini]] Specific settings ==
+
* H_SCALER = 6
 +
* V_SCALER = 5
 +
* SHARPNESS = 0 or 1 (0 recommended)
  
insert data
+
NOTE: Even if 1080p is enabled as an output resolution, most PS3 games will choose a 720p output mode.
  
 
[[Category:Game Consoles]]
 
[[Category:Game Consoles]]
 
[[Category:RGB Mods]]
 
[[Category:RGB Mods]]
 +
 +
== [[Morph 4K]] Specific Settings ==
 +
 +
The PS3 supports native 1080p, although most PS3 games output in 720p.  Make sure the PS3 resolution options have 720p and 1080p enabled.  The PS3 will output at the maximum resolution supported by each game.
 +
 +
Video > Scaler
 +
* Aspect Ratio: Auto
 +
* Horiz. Prescale: Auto (/1)
 +
* Vert. Prescale: Auto (/1)
 +
 +
Video > Output Resolution
 +
* 4K (3840x2160)

Latest revision as of 18:01, 22 October 2024

Every consumer PS3 has HDCP built-in and it cannot be disabled. Although PS3 developer units do not have HDCP built-in, they lack the ability to play DVD and Blu-ray discs.

If you plan to use one of the scalers below with a PS3, then you must bypass HDCP with an intermediary device (PS3 > Device > Scaler). Ways to achieve this:

  • An HDMI 1x2 splitter or 1x1 audio extractor (digital-to-digital)
  • A component video cable or adapter (analog-to-digital)

Aside from the cost effective options above, there is also an HDCP Doctor aka HDfury (digital-to-digital). This would decrypt/encrypt using a custom firmware, but it's very expensive.

Models

insert data

Models Tested

  • CECH-2003A through HDMI

XRGB-2 Specific Settings

insert data

XRGB-3 Specific Settings

insert data

XRGB-Mini Specific Settings

The following settings are recommended for upscaling 720p to 1080p (tested with the Mini's HDMI input):

  • H_SCALER = 6
  • V_SCALER = 5
  • SHARPNESS = 0 or 1 (0 recommended)

NOTE: Even if 1080p is enabled as an output resolution, most PS3 games will choose a 720p output mode.

Morph 4K Specific Settings

The PS3 supports native 1080p, although most PS3 games output in 720p. Make sure the PS3 resolution options have 720p and 1080p enabled. The PS3 will output at the maximum resolution supported by each game.

Video > Scaler

  • Aspect Ratio: Auto
  • Horiz. Prescale: Auto (/1)
  • Vert. Prescale: Auto (/1)

Video > Output Resolution

  • 4K (3840x2160)