Difference between revisions of "Direct Video Info"

From Classic Console Upscaler Wiki
Jump to navigation Jump to search
(→‎Direct Video Info)
(updated OSSC Pro now supports pixel de-repetition)
 
(49 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
=== Direct Video Info ===
+
=== Direct Video Modes ===
  
−
Passthru is as if the GEM had a 240p/480i output resolution option.  It's a 240p/480i output mode that uses the scaler to buffer a few lines of video to stabilize the video timing
+
Passthru is as if the GEM had a 240p/480i output resolution option.  It's a 240p/480i output mode that uses the scaler to buffer a few lines of video to stabilize the video timing *
  
−
DV1 is zero buffering
+
DV1 is zero buffering and sends the native vertical resolution, usually 240p or 480i over HDMI. Horizontal resolution is multiplied to meet HDMI minimum clock frequency requirements.
  
−
==== Lag or Latency ====
+
FX-Direct packages the native resolution in a higher standard resolution (1280x720p) output frame that might be more compatible with switches and other equipment.
 +
 
 +
* Passthru mode requires 3.9.46.4 or greater
 +
 
 +
=== Direct Video Modes Lag or Latency ===
  
 
DV1 = zero lag
 
DV1 = zero lag
Line 13: Line 17:
 
FX-Direct = typical scaler line latency
 
FX-Direct = typical scaler line latency
  
−
=== Direct Video Preferred Options Table ===
+
=== Direct Video Modes Preferred Options Table ===
 +
(Last Updated 09/08/2024)
 +
 
 +
The below chart assumes the device is running direct to the upscaler, and the recommendations may change based on switches or splitters inserted in between. 
 +
 
 +
Check the hdmi switch reference guide for compatibility.
 +
 
 +
 
 +
✅ = Supported
 +
 
 +
👍 = Recommended Setting for each scaler
 +
 
 +
🤷 = Not Tested
 +
 
 +
❌ = Not Supported
 +
 
 +
•  PS1Digital may have issues with DV1
 +
 
 +
•  PixelFX products dynamically change their pixel de-repetition values when their on-screen menus are opened.
 +
 
 +
•  OSSC Pro on firmware 0.77 or later should also support automatic pixel de-repetition when using the on screen menus.
 +
 
 +
•  OSSC Pro on 0.76 or earlier firmwares does not support automatic pixel de-repetition and so the OSD may appear corrupted. As a workaround, manually change Pixel de-repetition on the OSSC Pro (under AV4 video in opt.) to 1, make the required changes to your PixelFX product and then exit the menu. Be sure to set Pixel de-repetition back to Auto mode on the OSSC Pro once you are finished.
 +
 
 +
 
 
{| class="wikitable" style="text-align: center"  
 
{| class="wikitable" style="text-align: center"  
 
|+ Upscalers and Systems
 
|+ Upscalers and Systems
−
! Video Mode !! PS1Digital !! N64 Digital !! DCDigital !! PS1 GEM !! PS2 GEM !! N64 GEM !! DC GEM !! Morph4K !! RetroTink4k !! MiSTer !! OSSC !! OSSC Pro !! Reported By
+
! Video Mode !! PixelFX System !! [[Morph 4k]] !! [[RetroTINK4K]] !! [[OSSC Pro]] !! Reported By/Notes
 +
|-
 +
!rowspan="8"|FX-Direct
 +
|PS1Digital  || ✅ || ❌ || 🤷 ||
 +
|-
 +
|N64Digital  || ✅ || ❌ || 🤷 ||
 +
|-
 +
|DCDigital  || ✅ || ❌ || 🤷 ||
 +
|-
 +
|PS1 GEM || ✅ || ❌ || 🤷 ||
 +
|-
 +
|PS2 GEM  || ✅ || ❌ || 🤷 ||
 +
|-
 +
|N64 GEM  || ✅ || ❌ || 🤷 ||
 +
|-
 +
|DC GEM  || ✅ || ❌ || 🤷 ||
 +
|-
 +
|MiSTer  || ❌ || ❌ || ❌ ||
 +
|-
 +
!rowspan="8|DV1
 +
|PS1Digital  || • || • || ❌ || miba (dv1 ossc pro)
 +
|-
 +
|N64Digital  || ✅ || 👍 || ✅ ||
 +
|-
 +
|DCDigital  || ✅ || 👍 || ✅ ||
 +
|-
 +
|PS1 GEM  || ✅ || 👍 || ✅ || BuckoA51(Works on OSSC Pro scaler mode, has warped top line)
 +
|-
 +
|PS2 GEM || ✅ || 👍 || ✅ ||
 +
|-
 +
|N64 GEM || ✅ || 👍 || ✅ ||
 +
|-
 +
|DC GEM || ✅ || 👍 || ✅ ||
 +
|-
 +
|MiSTer || 👍 || 👍 || 👍 ||
 +
|-
 +
!rowspan="8"|Passthru
 +
|PS1Digital  || 👍 || 👍 || 👍 || pelvicthrustman (ps1d rt4k)/BuckoA51(OSSC Pro)
 +
|-
 +
|N64Digital  || 👍 || ✅ || ✅ || miba (passthru ossc pro)
 +
|-
 +
|DCDigital  || 👍 || ✅ || 🤷 ||
 +
|-
 +
|PS1 GEM  || 👍 || ✅ || 👍 ||  BuckoA51(OSSC Pro)
 +
|-
 +
|PS2 GEM  || 👍 || ✅ || 🤷 ||
 +
|-
 +
|N64 GEM  || 👍 || ✅ || 🤷 ||
 
|-
 
|-
−
! FX-Direct
+
|DC GEM || 👍 || ✅ || 🤷 ||
−
|  || ||  ||  ||  ||  ||  ||  ||  || || ||  ||  ||  
 
 
|-
 
|-
−
! DV1
+
|MiSTer || ❌ || ❌ || ❌ ||
−
|  || ||  ||  ||  ||  ||  ||  ||  || || ||  ||  ||  
 
 
|-
 
|-
−
! Passthru
 
−
|  ||  ||  ||  ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
 
 
|}
 
|}

Latest revision as of 12:23, 7 November 2024

Direct Video Modes

Passthru is as if the GEM had a 240p/480i output resolution option. It's a 240p/480i output mode that uses the scaler to buffer a few lines of video to stabilize the video timing *

DV1 is zero buffering and sends the native vertical resolution, usually 240p or 480i over HDMI. Horizontal resolution is multiplied to meet HDMI minimum clock frequency requirements.

FX-Direct packages the native resolution in a higher standard resolution (1280x720p) output frame that might be more compatible with switches and other equipment. 

* Passthru mode requires 3.9.46.4 or greater

Direct Video Modes Lag or Latency

DV1 = zero lag

Passthru = line doubler

FX-Direct = typical scaler line latency

Direct Video Modes Preferred Options Table

(Last Updated 09/08/2024)

The below chart assumes the device is running direct to the upscaler, and the recommendations may change based on switches or splitters inserted in between.

Check the hdmi switch reference guide for compatibility.


✅ = Supported

👍 = Recommended Setting for each scaler

🤷 = Not Tested

❌ = Not Supported

• PS1Digital may have issues with DV1

• PixelFX products dynamically change their pixel de-repetition values when their on-screen menus are opened.

• OSSC Pro on firmware 0.77 or later should also support automatic pixel de-repetition when using the on screen menus.

• OSSC Pro on 0.76 or earlier firmwares does not support automatic pixel de-repetition and so the OSD may appear corrupted. As a workaround, manually change Pixel de-repetition on the OSSC Pro (under AV4 video in opt.) to 1, make the required changes to your PixelFX product and then exit the menu. Be sure to set Pixel de-repetition back to Auto mode on the OSSC Pro once you are finished.


Upscalers and Systems
Video Mode PixelFX System Morph 4k RetroTINK4K OSSC Pro Reported By/Notes
FX-Direct PS1Digital ✅ ❌ 🤷
N64Digital ✅ ❌ 🤷
DCDigital ✅ ❌ 🤷
PS1 GEM ✅ ❌ 🤷
PS2 GEM ✅ ❌ 🤷
N64 GEM ✅ ❌ 🤷
DC GEM ✅ ❌ 🤷
MiSTer ❌ ❌ ❌
DV1 PS1Digital • • ❌ miba (dv1 ossc pro)
N64Digital ✅ 👍 ✅
DCDigital ✅ 👍 ✅
PS1 GEM ✅ 👍 ✅ BuckoA51(Works on OSSC Pro scaler mode, has warped top line)
PS2 GEM ✅ 👍 ✅
N64 GEM ✅ 👍 ✅
DC GEM ✅ 👍 ✅
MiSTer 👍 👍 👍
Passthru PS1Digital 👍 👍 👍 pelvicthrustman (ps1d rt4k)/BuckoA51(OSSC Pro)
N64Digital 👍 ✅ ✅ miba (passthru ossc pro)
DCDigital 👍 ✅ 🤷
PS1 GEM 👍 ✅ 👍 BuckoA51(OSSC Pro)
PS2 GEM 👍 ✅ 🤷
N64 GEM 👍 ✅ 🤷
DC GEM 👍 ✅ 🤷
MiSTer ❌ ❌ ❌
Retrieved from "http://junkerhq.net//xrgb/index.php?title=Direct_Video_Info&oldid=3358"