Difference between revisions of "DExx-vd isl"

From Classic Console Upscaler Wiki
Jump to navigation Jump to search
Line 69: Line 69:
 
==== DE10-Nano ====
 
==== DE10-Nano ====
  
 +
Insert the board into the header which is closer to the FPGA so that both HDMI and SCART ports are facing the same direction. Then plug the 4-pin jumper cable between the boards as shown in the picture. If you use standard SCART-RGB sources, flip the red sync switch towards "CSYNC" as pictured.
  
 +
[[File:De10n-conn.jpg]]
 +
 +
Prepara a dedicated microSD card (>=64MB) by downloading latest firmware [https://github.com/marqs85/DExx-vd_isl/blob/master/board/de10-nano/software/bootloader/sd_image/sdcard_cv.img?raw=true image] and writing it on the card in raw e.g. via [https://sourceforge.net/projects/win32diskimager/ Win32 Disk Imager]. Subsequent firmware updates can be made by easier fashion, see [[#Firmware update]].
 +
 +
Additional notes are found on the board-specific [https://github.com/marqs85/DExx-vd_isl/tree/master/board/de10-nano/README.md README].
  
 
==== Other development boards ====
 
==== Other development boards ====
 +
 +
* C5G
 +
* DE2-115
  
 
=== Remote control ===
 
=== Remote control ===
Line 83: Line 92:
 
* OK: Selects sub-menu or function
 
* OK: Selects sub-menu or function
 
* BACK: Returns to previous menu level or from info page to normal source display page
 
* BACK: Returns to previous menu level or from info page to normal source display page
−
* UP/DOWN: Selects next/previous menu option
+
* UP/DOWN: Selects next/previous menu option or next/previous input when not in menu.
 
* LEFT/RIGHT: Option value -/+
 
* LEFT/RIGHT: Option value -/+
 
* INFO: Displays detailed timings of video input and output. Also displays firmware version.
 
* INFO: Displays detailed timings of video input and output. Also displays firmware version.
Line 97: Line 106:
  
 
=== Getting started ===
 
=== Getting started ===
 +
 +
Once DExx-vd_isl has been attached to the development board and source and monitor are connected, power on the development board. A 480p test pattern should show up in the monitor. Turn on the video source and select correct input via remote and sync switch (refer to [[#AV1 (SCART)]] table).
 +
 +
The firmware has 2 primary operating modes: line multiplier and scaler. Line multiplier is reminiscent of classic line doublers and OSSC while scaler works more like video processors like VP50 or Framemeister. In general scaler mode offers more flexibility and easier usage via fixed output resolution and (optionally) fixed refresh rate. Some users may prefer to stay with strict multiplication to preserve the original look as much as possible, though. The mode can be switched from "Output opt -> Operating mode" on the menu. Main menu has matching sub-menus for each of the 2 operating modes which are accessible even if the said operating mode is not active. Most important picture processing settings are found under these sub-menus, refer to next section for mode details.
  
 
== Settings ==
 
== Settings ==
 +
 +
=== Input select ===
 +
 +
Selects the source.
 +
 +
=== AV1 video in opt. ===
 +
 +
==== Video LPF ====
 +
''Video low-pass filter. Filters out high-frequency noise on video.''
 +
* '''Auto''': Suitable LPF is automatically selected based on source mode '''[default]'''
 +
* '''9-450MHz''': Video bandwidth is limited to selected frequency
 +
 +
==== YPbPr input Color Space ====
 +
''Controls YPbPr->RGB colorspace conversion coefficients.''
 +
* '''Rec. 601''': Input is assumed to be in Rec. 601 format, which is generally true for SD video '''[default]'''
 +
* '''Rec. 709''': Input is assumed to be in Rec. 709 format, which is generally true for HD video
 +
 +
==== R/Pr / G/Y / B/Pb offset ====
 +
''Fine-adjustment of Red/Pr / G/Y / B/Pb channel offset (brightness).''
 +
* '''0-1023''': '''[default=512]'''
 +
 +
==== R/Pr / G/Y / B/Pb gain ====
 +
''Fine-adjustment of Red/Pr / G/Y / B/Pb channel gain (contrast).''
 +
* '''0-1023''': '''[default=324]'''
 +
 +
==== Clamp strength ====
 +
''Sets the strength of backporch clamp.''
 +
* '''0-7''': '''[default=7]'''
 +
 +
==== Clamp/ALC position ====
 +
''Sets the position of backporch clamp (in percentage of line length).''
 +
* '''0.1-25%''': '''[default=0.7%]'''
 +
 +
==== Clamp width ====
 +
''Sets the width of backporch clamp pulse (in percentage of line length).''
 +
* '''0.1-10%''': '''[default=2.5%]'''
 +
 +
==== Clamp/ALC on coast ====
 +
''Sets whether clamp/ALC is enabled during coast.''
 +
* '''On''': Clamp/ALC enabled during coast. '''[default]'''
 +
* '''Off''': Clamp/ALC disabled during coast.
 +
 +
==== Auto level ctl (ALC) ====
 +
''Sets whether ALC is enabled.''
 +
* '''On''': ALC enabled. '''[default]'''
 +
* '''Off''': ALC disabled.
 +
 +
==== ALC V filter ====
 +
''ALV vertical filter coefficient. Reduce from default if line/field tilt occurs.''
 +
* '''32-4096 lines''': '''[default=512 lines]'''
 +
 +
==== ALC H filter ====
 +
''ALV horizontal filter coefficient (duration for which ALC is applied after clamp).''
 +
* '''16-128 pixels''': '''[default=16 pixels]'''
 +
 +
=== AV1 sync opt. ===
 +
 +
==== Analog sync Vth ====
 +
''Sets the sync slicer threshold for video-level sync. May need adjustment if source sync level is not typical and dropouts occur.''
 +
* '''0-300mV''': threshold voltage. '''[default=120mV]'''
 +
 +
==== TTL Hsync Vth ====
 +
''Sets the sync slicer threshold for TTL level sync. May need adjustment if source sync level is not typical and dropouts occur.''
 +
* '''400-3205mV''': threshold voltage. '''[default=1148mV]'''
 +
 +
==== Sync glitch filt len ====
 +
''Sets the sync glitch filter length. May need to be increased if there are glitches around sync pulses.''
 +
* '''37-592ns''': filter length. '''[default=111ns]'''
 +
 +
==== H-PLL Pre-Coast ====
 +
''Defines when PLL coast (current freq. freeze) is activated.''
 +
* '''0-5 lines''': Number of scanlines before vsync at when coast is activated. '''[default=4]'''
 +
 +
==== H-PLL Post-Coast ====
 +
''Defines when PLL coast (current freq. freeze) is deactivated.''
 +
* '''0-5 lines''': Number of scanlines after vsync at when coast is deactivated. '''[default=4]'''
 +
 +
==== H-PLL Loop Gain ====
 +
''Adjusts loop gain of H-PLL which affects sampling clock stability. A higher value makes the PLL react fast to changes in hsync interval which may make sampling more accurate but at the cost of increased jitter in output pixel clock. A small value ensures best compatibility, but sync jitter in the source (e.g. SNES) may result to sampling jitter on nearby scanlines. Increase for sources with sync jitter if your display is able to tolerate jitter in output clock.''
 +
* '''0-3''': '''[default=0]'''
 +
 +
=== Line multiplier opt ===
 +
 +
=== Scaler opt. ===
 +
 +
=== Output opt. ===
 +
 +
==== Operating mode ====
 +
''Selects operating mode of the device. Respective sub-menus under main menu have detailed options for each operating mode''
 +
* '''Line multiplier''': Operates in basic line multiplication mode. '''[default]'''
 +
* '''Scaker''': Operates in more flexible scaler mode.
 +
 +
==== Test pattern mode ====
 +
''Selects video mode for test pattern. May be used to test display compatibility.''
 +
* '''240p...2560x1440_60''': Output video mode. '''[default=480p]'''
 +
 +
==== TX mode ====
 +
''Sets the output TX mode.''
 +
* '''HDMI (RGB Full)''': 24-bit full range RGB output with audio and auxiliary Infoframe packets. '''[default]'''
 +
* '''HDMI (RGB Limited)''': 24-bit limited range RGB output with audio and auxiliary Infoframe packets.
 +
* '''HDMI (YCbCr444)''': 24-bit YCbCr 4:4:4 (Rec. 601) output with audio and auxiliary Infoframe packets.
 +
* '''DVI''': 24-bit full range RGB output. Required if target display does not support HDMI.
 +
 +
=== Audio opt. ===
 +
 +
==== Sampling format ====
 +
 +
==== Quad stereo ====
 +
 +
==== AV1 audio source ====
 +
 +
=== Scanline opt. ===
 +
 +
==== Scanlines ====
 +
''Controls whether emulated scanlines are drawn on top of the picture''
 +
* '''Off''': No scanlines drawn '''[default]'''
 +
* '''Auto''': Horizontal scanlines are drawn for 240p/288p sources, alternating scanlines are enabled for 480i/576i, no scanlines for other sources
 +
* '''On''': Scanlines are drawn for every source according to "Scanline type" option
 +
 +
==== Sl. strength ====
 +
* '''6-100%''': Strength of the emulated scanlines '''[default=6%]'''
 +
 +
==== Sl. method ====
 +
''Selects the method how scanlines are generated.''
 +
* '''Multiplication''': Scanline is generated by multiplying source RGB value '''[default]'''
 +
* '''Subtraction''': Scanline is generated by subtracting from source RGB value
 +
 +
==== Sl. LM Bob altern. ====
 +
''Controls whether scanline position alternates along with fields of Bob deinterlaced LM modes.''
 +
* '''Off''': Scanlines are always mapped to same output lines.
 +
* '''On''': Position is tied to field which shows as alternating position in output. Useful for reducing flicker. '''[default]'''
 +
 +
==== Sl. alignment ====
 +
* '''Top''': Scanline is drawn on top position of every group of output lines formed from a single input line. '''[default]'''
 +
* '''Bottom''': Scanline is drawn on bottom position of every group of output lines formed from a single input line.
 +
 +
==== Scanline type ====
 +
* '''Horizontal''': Scanlines are drawn on every other (passthru & line2x modes), every third (line3x), every 2 out of 4 (line4x) or every 2 out of 5 (line5x) output lines. '''[default]'''
 +
* '''Vertical''': Scanlines are drawn on every other output column.
 +
* '''Horiz. + Vert.''': Combination of horizontal and vertical mode.
 +
* '''Custom''': Scanlines are drawn accoring to line-wise and column-wise strength set under Custom Sl.
 +
 +
==== Custom Sl. ====
 +
''Enables separate setting of each overlay line and column (line strength takes priority on pixels where it is >0%). To check how many sub-lines and -columns are in each mode, refer to [[Optimal timings#Horizontal multiplication factors]].''
 +
 +
===== H interval =====
 +
''Sets the horizontal interval (in output pixels) in which the column overlay pattern is repeated.''
 +
 +
===== V interval =====
 +
''Sets the vertical interval (in output lines) in which the line overlay pattern is repeated.''
 +
 +
===== Sub-line M str =====
 +
''Strength for Mth sub-line, 0% disables line overlay.''
 +
 +
===== Sub-column N str =====
 +
''Strength for Nth sub-column, 0% disables column overlay.''
 +
 +
=== Post-proc. ===
 +
 +
==== Mask color ====
 +
''Sets mask color''
 +
* '''Black|Blue|Green|Cyan|Red|Magenta|Yellow|White''': Mask color. '''[default=Black]'''
 +
 +
==== Mask brightness ====
 +
''Sets mask brightness (only effective is color is set to non-black). Could be used as a precaution with self-emissive displays to avoid uneven wear.''
 +
* '''0-15''': Mask brightness level. '''[default=8]'''
 +
 +
==== BFI for 2x Hz ====
 +
''Enables black frame insertion feature for modes where output refresh rate is min. 2x of input. Reducing image persistence can be used to improve motion resolution at the cost of some flicker.''
 +
* '''On''': BFI enabled.
 +
* '''Off''': BFI disabled. '''[default]'''
 +
 +
==== BFI strength ====
 +
''Sets the strength of BFI to trade off motion resolution for improved brightness / reduced flicker''
 +
* '''6-100%''': Sets opaqueness of the black mask applied over a duplicated frame. '''[default=100%]'''
 +
 +
=== Settings ===
 +
 +
==== Initial input ====
 +
''Sets the input which is automatically activated when device is powered on. If "last used" is selected, id is saved every time input is switched (adding a minor delay) and is automatically selected next time the board is powered on. Test pattern is diplayed regardless of initial input setting until sync is detected on the respective input.''
 +
 +
==== OSD ====
 +
Selects whether OSD rendering is enabled and in which mode. When enabled, Navigation OSD is permanently visible when menu is active and a status OSD is temporarily displayed when input video mode changes.
 +
* '''Off''': OSD is not displayed.
 +
* '''Full''': Full OSD is displayed. '''[default]'''
 +
* '''Simple''': Simple OSD is displayed.
 +
 +
==== OSD status display ====
 +
Selects how long updated video parameters are shown on the status OSD.
 +
* '''2s''': status shown for 2 seconds.
 +
* '''5s''': status shown for 5 seconds. '''[default]'''
 +
* '''10s''': status shown for 10 seconds.
 +
* '''Off''': Status is not displayed.
 +
 +
==== Reset settings ====
 +
''Resets current profile to default values without saving it.''
  
 
== Firmware update ==
 
== Firmware update ==
 +
 +
=== DE10-Nano ===
 +
 +
Eject the SD card and insert in into a computer. Replace DE10-Nano-vd_isl.rbf file on the filesystem with latest [https://github.com/marqs85/DExx-vd_isl/blob/master/board/de10-nano/output_files/DE10-Nano-vd_isl.rbf?raw=true version].
 +
 +
=== Other boards ===
 +
 +
Program latest .jic file on the flash of the development board. Refer to board-specific READMEs in github for more details.
  
 
== Firmware changelog and roadmap ==
 
== Firmware changelog and roadmap ==

Revision as of 17:24, 26 June 2022

Contents

Introduction

DExx-vd_isl is video digitizer expansion card for selected Altera/Intel FPGA development boards, primarily DE10-Nano. Most common use scenario is connecting retro video game consoles and home computers to modern displays. The combination of FPGA development board and expansion card has been used in development of OSSC Pro and can be considered OSSC Pro Lite version since aside from more limited connectivity and performance, it shares most major features.

If you're new to the OSSC and scalers/processors in general, you may wish to jump to the quick start guide [link_todo here.]

Features

  • Digitizes analog video sources in RGBS, RGBCS (TTL csync), RGBHV and YPbPr formats connected to SCART connector
  • Up to ~110MHz sampling clock supporting up to 720p@60/1080i@60 inputs.
  • Output up to ~165MHz (1920x1080p@60, 1920x1200p@60 etc.)
  • Analog and digital audio inputs via SCART and toslink (DE10-Nano needs a modification for SPDIF support)
  • OSD and optional character display as UI. IR control using OSSC remote control.
  • Line multiplication and scaler operating modes
  • Free running and frame locked operation
  • Motion adaptive deinterlacing
  • Low latency (<=40 scanlines in LM mode, ~1 frame in framelocked scaler mode)
  • Various sampling presets for classic consoles and home computers
  • Postprocessing options including scanlines and BFI

Board versions and availability

DIY

PCB and parts for the board can be purchased from known manufacturers (e.g. JLCPCB, OSHPark) and suppliers (e.g. Mouser, Digikey) but at the time of writing it may not be feasible/economical due to component shortages.

Pre-assembled board

Pre-assembled boards are sold worldwide by:

More information & discussion

AV inputs

AV1 (SCART)

The SCART connector of DExx-vd_isl supports a number of video/sync formats. SCART-RGB sources can be connected as-is while other formats require passthru cables/adapters. Input is selected via remote key / OSD input menu and the on-board sync switch. The table below summarizes available inputs, their corresponding remote hotkeys and required position of the sync switch.

Input name Remote hotkey Sync switch position Notes
Test pattern 0 Any Change test resolution with LEFT/RIGHT remote keys or via menu.
AV1_RGBS 1 CSYNC For video level c-sync only. Sync can be also extracted from composite video / luma.
AV1_RGsB 4 SOG
AV1_YPbPr 4 (tap twice) SOG Use YPbPr to SCART passthru adapter if you can build/find one.
AV1_RGBHV 7 Any Needs a custom adapter cable which routes HSYNC to SCART pin 12 and VSYNC to pin 10.
AV1_RGBCS 7 (tap twice) Any For TTL c-sync only. Needs a custom adapter cable which routes CSYNC to SCART pin 12.

Toslink

The toslink input supports LPCM 44.1/48/96kHz and compressed bitstream (Dolby Digital, DTS) formats. The audio stream is forwarded as-is to HDMI transmitter.

Basic setup & usage

Board installation

DE10-Nano

Insert the board into the header which is closer to the FPGA so that both HDMI and SCART ports are facing the same direction. Then plug the 4-pin jumper cable between the boards as shown in the picture. If you use standard SCART-RGB sources, flip the red sync switch towards "CSYNC" as pictured.

De10n-conn.jpg

Prepara a dedicated microSD card (>=64MB) by downloading latest firmware image and writing it on the card in raw e.g. via Win32 Disk Imager. Subsequent firmware updates can be made by easier fashion, see #Firmware update.

Additional notes are found on the board-specific README.

Other development boards

  • C5G
  • DE2-115

Remote control

Default remote control keymap

DExx-vd_isl operates with L336 infrared remote pre-programmed for OSSC. Key functionality is listed below.

  • 0-9: Selects AV source and input format. See remote picture on the side for reference.
  • MENU: Activates/deactivates OSD menu
  • OK: Selects sub-menu or function
  • BACK: Returns to previous menu level or from info page to normal source display page
  • UP/DOWN: Selects next/previous menu option or next/previous input when not in menu.
  • LEFT/RIGHT: Option value -/+
  • INFO: Displays detailed timings of video input and output. Also displays firmware version.
  • SCANLINE_MODE: Hotkey for selecting next "Scanlines" option value
  • SCANLINE_TYPE: Hotkey for selecting next "Scanline type" option value
  • SCANLINE_INT+/-: Hotkeys for adjusting scanline strength
  • LINEMULT_PROC:
  • SAMP_PHASE+/-:
  • ZOOM:
  • PAN:
  • OSD:
  • PROFILE_LOAD:

Getting started

Once DExx-vd_isl has been attached to the development board and source and monitor are connected, power on the development board. A 480p test pattern should show up in the monitor. Turn on the video source and select correct input via remote and sync switch (refer to #AV1 (SCART) table).

The firmware has 2 primary operating modes: line multiplier and scaler. Line multiplier is reminiscent of classic line doublers and OSSC while scaler works more like video processors like VP50 or Framemeister. In general scaler mode offers more flexibility and easier usage via fixed output resolution and (optionally) fixed refresh rate. Some users may prefer to stay with strict multiplication to preserve the original look as much as possible, though. The mode can be switched from "Output opt -> Operating mode" on the menu. Main menu has matching sub-menus for each of the 2 operating modes which are accessible even if the said operating mode is not active. Most important picture processing settings are found under these sub-menus, refer to next section for mode details.

Settings

Input select

Selects the source.

AV1 video in opt.

Video LPF

Video low-pass filter. Filters out high-frequency noise on video.

  • Auto: Suitable LPF is automatically selected based on source mode [default]
  • 9-450MHz: Video bandwidth is limited to selected frequency

YPbPr input Color Space

Controls YPbPr->RGB colorspace conversion coefficients.

  • Rec. 601: Input is assumed to be in Rec. 601 format, which is generally true for SD video [default]
  • Rec. 709: Input is assumed to be in Rec. 709 format, which is generally true for HD video

R/Pr / G/Y / B/Pb offset

Fine-adjustment of Red/Pr / G/Y / B/Pb channel offset (brightness).

  • 0-1023: [default=512]

R/Pr / G/Y / B/Pb gain

Fine-adjustment of Red/Pr / G/Y / B/Pb channel gain (contrast).

  • 0-1023: [default=324]

Clamp strength

Sets the strength of backporch clamp.

  • 0-7: [default=7]

Clamp/ALC position

Sets the position of backporch clamp (in percentage of line length).

  • 0.1-25%: [default=0.7%]

Clamp width

Sets the width of backporch clamp pulse (in percentage of line length).

  • 0.1-10%: [default=2.5%]

Clamp/ALC on coast

Sets whether clamp/ALC is enabled during coast.

  • On: Clamp/ALC enabled during coast. [default]
  • Off: Clamp/ALC disabled during coast.

Auto level ctl (ALC)

Sets whether ALC is enabled.

  • On: ALC enabled. [default]
  • Off: ALC disabled.

ALC V filter

ALV vertical filter coefficient. Reduce from default if line/field tilt occurs.

  • 32-4096 lines: [default=512 lines]

ALC H filter

ALV horizontal filter coefficient (duration for which ALC is applied after clamp).

  • 16-128 pixels: [default=16 pixels]

AV1 sync opt.

Analog sync Vth

Sets the sync slicer threshold for video-level sync. May need adjustment if source sync level is not typical and dropouts occur.

  • 0-300mV: threshold voltage. [default=120mV]

TTL Hsync Vth

Sets the sync slicer threshold for TTL level sync. May need adjustment if source sync level is not typical and dropouts occur.

  • 400-3205mV: threshold voltage. [default=1148mV]

Sync glitch filt len

Sets the sync glitch filter length. May need to be increased if there are glitches around sync pulses.

  • 37-592ns: filter length. [default=111ns]

H-PLL Pre-Coast

Defines when PLL coast (current freq. freeze) is activated.

  • 0-5 lines: Number of scanlines before vsync at when coast is activated. [default=4]

H-PLL Post-Coast

Defines when PLL coast (current freq. freeze) is deactivated.

  • 0-5 lines: Number of scanlines after vsync at when coast is deactivated. [default=4]

H-PLL Loop Gain

Adjusts loop gain of H-PLL which affects sampling clock stability. A higher value makes the PLL react fast to changes in hsync interval which may make sampling more accurate but at the cost of increased jitter in output pixel clock. A small value ensures best compatibility, but sync jitter in the source (e.g. SNES) may result to sampling jitter on nearby scanlines. Increase for sources with sync jitter if your display is able to tolerate jitter in output clock.

  • 0-3: [default=0]

Line multiplier opt

Scaler opt.

Output opt.

Operating mode

Selects operating mode of the device. Respective sub-menus under main menu have detailed options for each operating mode

  • Line multiplier: Operates in basic line multiplication mode. [default]
  • Scaker: Operates in more flexible scaler mode.

Test pattern mode

Selects video mode for test pattern. May be used to test display compatibility.

  • 240p...2560x1440_60: Output video mode. [default=480p]

TX mode

Sets the output TX mode.

  • HDMI (RGB Full): 24-bit full range RGB output with audio and auxiliary Infoframe packets. [default]
  • HDMI (RGB Limited): 24-bit limited range RGB output with audio and auxiliary Infoframe packets.
  • HDMI (YCbCr444): 24-bit YCbCr 4:4:4 (Rec. 601) output with audio and auxiliary Infoframe packets.
  • DVI: 24-bit full range RGB output. Required if target display does not support HDMI.

Audio opt.

Sampling format

Quad stereo

AV1 audio source

Scanline opt.

Scanlines

Controls whether emulated scanlines are drawn on top of the picture

  • Off: No scanlines drawn [default]
  • Auto: Horizontal scanlines are drawn for 240p/288p sources, alternating scanlines are enabled for 480i/576i, no scanlines for other sources
  • On: Scanlines are drawn for every source according to "Scanline type" option

Sl. strength

  • 6-100%: Strength of the emulated scanlines [default=6%]

Sl. method

Selects the method how scanlines are generated.

  • Multiplication: Scanline is generated by multiplying source RGB value [default]
  • Subtraction: Scanline is generated by subtracting from source RGB value

Sl. LM Bob altern.

Controls whether scanline position alternates along with fields of Bob deinterlaced LM modes.

  • Off: Scanlines are always mapped to same output lines.
  • On: Position is tied to field which shows as alternating position in output. Useful for reducing flicker. [default]

Sl. alignment

  • Top: Scanline is drawn on top position of every group of output lines formed from a single input line. [default]
  • Bottom: Scanline is drawn on bottom position of every group of output lines formed from a single input line.

Scanline type

  • Horizontal: Scanlines are drawn on every other (passthru & line2x modes), every third (line3x), every 2 out of 4 (line4x) or every 2 out of 5 (line5x) output lines. [default]
  • Vertical: Scanlines are drawn on every other output column.
  • Horiz. + Vert.: Combination of horizontal and vertical mode.
  • Custom: Scanlines are drawn accoring to line-wise and column-wise strength set under Custom Sl.

Custom Sl.

Enables separate setting of each overlay line and column (line strength takes priority on pixels where it is >0%). To check how many sub-lines and -columns are in each mode, refer to Optimal timings#Horizontal multiplication factors.

H interval

Sets the horizontal interval (in output pixels) in which the column overlay pattern is repeated.

V interval

Sets the vertical interval (in output lines) in which the line overlay pattern is repeated.

Sub-line M str

Strength for Mth sub-line, 0% disables line overlay.

Sub-column N str

Strength for Nth sub-column, 0% disables column overlay.

Post-proc.

Mask color

Sets mask color

  • Black|Blue|Green|Cyan|Red|Magenta|Yellow|White: Mask color. [default=Black]

Mask brightness

Sets mask brightness (only effective is color is set to non-black). Could be used as a precaution with self-emissive displays to avoid uneven wear.

  • 0-15: Mask brightness level. [default=8]

BFI for 2x Hz

Enables black frame insertion feature for modes where output refresh rate is min. 2x of input. Reducing image persistence can be used to improve motion resolution at the cost of some flicker.

  • On: BFI enabled.
  • Off: BFI disabled. [default]

BFI strength

Sets the strength of BFI to trade off motion resolution for improved brightness / reduced flicker

  • 6-100%: Sets opaqueness of the black mask applied over a duplicated frame. [default=100%]

Settings

Initial input

Sets the input which is automatically activated when device is powered on. If "last used" is selected, id is saved every time input is switched (adding a minor delay) and is automatically selected next time the board is powered on. Test pattern is diplayed regardless of initial input setting until sync is detected on the respective input.

OSD

Selects whether OSD rendering is enabled and in which mode. When enabled, Navigation OSD is permanently visible when menu is active and a status OSD is temporarily displayed when input video mode changes.

  • Off: OSD is not displayed.
  • Full: Full OSD is displayed. [default]
  • Simple: Simple OSD is displayed.

OSD status display

Selects how long updated video parameters are shown on the status OSD.

  • 2s: status shown for 2 seconds.
  • 5s: status shown for 5 seconds. [default]
  • 10s: status shown for 10 seconds.
  • Off: Status is not displayed.

Reset settings

Resets current profile to default values without saving it.

Firmware update

DE10-Nano

Eject the SD card and insert in into a computer. Replace DE10-Nano-vd_isl.rbf file on the filesystem with latest version.

Other boards

Program latest .jic file on the flash of the development board. Refer to board-specific READMEs in github for more details.

Firmware changelog and roadmap

Info for developers

Retrieved from "http://junkerhq.net//xrgb/index.php?title=DExx-vd_isl&oldid=2686"