Direct Video Info

From Classic Console Upscaler Wiki
Revision as of 12:23, 7 November 2024 by BuckoA51 (talk | contribs) (updated OSSC Pro now supports pixel de-repetition)
(diff) ← Older revision | Latest revision (diff) | Newer revision β†’ (diff)
Jump to navigation Jump to search

Direct Video Modes

Passthru is as if the GEM had a 240p/480i output resolution option. It's a 240p/480i output mode that uses the scaler to buffer a few lines of video to stabilize the video timing *

DV1 is zero buffering and sends the native vertical resolution, usually 240p or 480i over HDMI. Horizontal resolution is multiplied to meet HDMI minimum clock frequency requirements.

FX-Direct packages the native resolution in a higher standard resolution (1280x720p) output frame that might be more compatible with switches and other equipment.

* Passthru mode requires 3.9.46.4 or greater

Direct Video Modes Lag or Latency

DV1 = zero lag

Passthru = line doubler

FX-Direct = typical scaler line latency

Direct Video Modes Preferred Options Table

(Last Updated 09/08/2024)

The below chart assumes the device is running direct to the upscaler, and the recommendations may change based on switches or splitters inserted in between.

Check the hdmi switch reference guide for compatibility.


βœ… = Supported

πŸ‘ = Recommended Setting for each scaler

🀷 = Not Tested

❌ = Not Supported

β€’ PS1Digital may have issues with DV1

β€’ PixelFX products dynamically change their pixel de-repetition values when their on-screen menus are opened.

β€’ OSSC Pro on firmware 0.77 or later should also support automatic pixel de-repetition when using the on screen menus.

β€’ OSSC Pro on 0.76 or earlier firmwares does not support automatic pixel de-repetition and so the OSD may appear corrupted. As a workaround, manually change Pixel de-repetition on the OSSC Pro (under AV4 video in opt.) to 1, make the required changes to your PixelFX product and then exit the menu. Be sure to set Pixel de-repetition back to Auto mode on the OSSC Pro once you are finished.


Upscalers and Systems
Video Mode PixelFX System Morph 4k RetroTINK4K OSSC Pro Reported By/Notes
FX-Direct PS1Digital βœ… ❌ 🀷
N64Digital βœ… ❌ 🀷
DCDigital βœ… ❌ 🀷
PS1 GEM βœ… ❌ 🀷
PS2 GEM βœ… ❌ 🀷
N64 GEM βœ… ❌ 🀷
DC GEM βœ… ❌ 🀷
MiSTer ❌ ❌ ❌
DV1 PS1Digital β€’ β€’ ❌ miba (dv1 ossc pro)
N64Digital βœ… πŸ‘ βœ…
DCDigital βœ… πŸ‘ βœ…
PS1 GEM βœ… πŸ‘ βœ… BuckoA51(Works on OSSC Pro scaler mode, has warped top line)
PS2 GEM βœ… πŸ‘ βœ…
N64 GEM βœ… πŸ‘ βœ…
DC GEM βœ… πŸ‘ βœ…
MiSTer πŸ‘ πŸ‘ πŸ‘
Passthru PS1Digital πŸ‘ πŸ‘ πŸ‘ pelvicthrustman (ps1d rt4k)/BuckoA51(OSSC Pro)
N64Digital πŸ‘ βœ… βœ… miba (passthru ossc pro)
DCDigital πŸ‘ βœ… 🀷
PS1 GEM πŸ‘ βœ… πŸ‘ BuckoA51(OSSC Pro)
PS2 GEM πŸ‘ βœ… 🀷
N64 GEM πŸ‘ βœ… 🀷
DC GEM πŸ‘ βœ… 🀷
MiSTer ❌ ❌ ❌